MAXMIMUM MOMENT AND ROTATION CAPACITY OF COMPOSITE BEAMS : Part3. Behavior of composite beams framed into steel structure
نویسندگان
چکیده
منابع مشابه
Nonlinear Time-Dependent Behavior of Composite Steel-Concrete Beams
This paper presents a mixed finite element model for the nonlinear time-dependant analysis of composite beams with partial shear connection. The key idea is to consider, as a first approach, a viscoelastic/plastic model for the concrete slab in order to simulate the interaction between the time effects of concrete, such as creep and shrinkage, and the concrete cracking. Creep is taken into acco...
متن کاملBehavior of Steel–Concrete Composite Beams with Corroded Shear Studs Under Negative Bending Moment
The behavior of corroded steel–concrete composite beams under hogging moment was studied by experimental investigation and theoretical analysis. A total of eight specimens, six of which had corroded shear studs, were tested. The corrosion rate of studs ranged from 0 to approximately 50%. The constant-current accelerated corrosion method was adopted to accelerate the corrosion process. The loadi...
متن کاملERFORMANCE-BASED SEISMIC DESIGN OPTIMIZATION OF COMPOSITE MOMENT RESISTING FRAMES WITH CONCERETFILLED STEEL COLUMNS AND STEEL BEAMS
In this paper, an optimization framework is developed for performance-based seismic design of composite moment frames consisting of concrete filled steel box columns and I-shaped steel beams. Material cost of the structure and seismic damage under severe earthquake ground motions are minimized as objective functions. Two design examples are presented to demonstrate the applicability and efficie...
متن کاملLong-term Stress of Simply Supported Steel-concrete Composite Beams
The theoretical model to compute the long-term stress of simply supported steel-concrete composite beam was deduced. The model includes the effects of steel bars in concrete slab, concrete shrinkage and creep. The computed results agreed well with the test results. On this basis, the effects of factors such as concrete age to loading, longitudinal reinforcement ratio in concrete slab, concrete ...
متن کاملInvestigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method
The composite structural system (RCS) is a new type of moment frame, which is including a combination of concrete columns (RC) and steel beams (S). These structural systems have the advantages of both concrete and steel frames [1]. In previous research on composite structures, there are some studies regarding RCS composite conections, but there is no investigation about seismic resisting system...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 1992
ISSN: 0910-8025,2433-0000
DOI: 10.3130/aijsx.439.0_153