Mathematical simulation of surface heating during plasma spraying
نویسندگان
چکیده
منابع مشابه
Feasibility of Plasma Spraying in Developing MMC Coatings: Modeling the Heating of Coated Powder Particles
Coated powder particles composed of a ceramic core and a metallic coating are being considered for plasma spray applications. The goal of using these powders is to produce particulate-reinforced metal-matrix composite coatings. In this work, the feasibility of plasma spray processing in producing these composite coatings is evaluated. A numerical model is presented to analyze the in-flight ther...
متن کاملPlasma spraying and characterization of chromium carbide – nickel chromium coatings
Chromium carbide – nickel chromium powder Cr3C2-25wt.NiCr was plasma sprayed by a water-stabilized system WSP®. A series of experiments with variable feeding distance was carried out. Basic characterization of coatings was done by XRD, SEM and light microscopy plus image analysis. Microhardness was measured on polished cross sections. The main focus of investigation was on resistances against w...
متن کاملMolecular Dynamics Simulation of Plasma Surface Interaction
New interlayer intermolecular potential model was proposed and it represented “ABAB” staking of graphite. Hydrogen atom sputtering on graphite surface was investigated usingmolecular dynamics simulation. In the initial short time period, maintaining the flat structure of graphenes, hydrogen atoms brought about the difference interaction process in each incident energy. The first graphene often ...
متن کاملSimulation O F Inductive Heating Simulation of Inductive Heating
Induction heating is a process whereby heat is generated in electrically conducting materials through ohmic losses from eddy currents induced by varying electromagnetic fields. This phenomenon can be described by a heat transfer equation and an eddy current equation. These two equations are coupled because most of the material properties are temperature-dependent. In this report a description i...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2017
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/177/1/012057