Mathematical Modelling of Primary Recrystallization Kinetics and Precipitation of Carbonitride Particles in Steels. II. Recrystallization Kinetics

نویسندگان

چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Kinetics of individual grains during recrystallization of cold-rolled copper

The formation of a recrystallization texture is closely related to the nucleation and growth of recrystallizing grains, which may vary from grain to grain. Cube texture is a commonly observed recrystallization texture in face centered cubic metals of medium to high stacking fault energy after heavy cold-rolling and annealing. In this work, recrystallization of pure copper cold-rolled to a von M...

متن کامل

Texture-dependent Measurement of Recrystallization Kinetics Using Electron Backscatter Diffraction

Partially recrystallized samples of 5352 aluminum alloy and pure titanium were sectioned and characterized with automated electron backscatter diffraction (EBSD) in a scanning electron microscope. Pixels were partitioned into recrystallized (annealed state) and unrecrystallized (deformed state) using a criterion based on the confidence index (CI) and the diffraction pattern quality (IQ). Unrecr...

متن کامل

Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test

In this work dynamic recrystallization behavior of AISI 403 martensitic stainless steel was studied using hot compression tests over temperature range of 900 C -1200 C and strain rate range of 0.001 s-1 - 1 s-1. The obtained flow curves showed that the hot compression behavior of the alloy is controlled by dynamic recrystallization. The flow stress and strain corresponding to the critical, pe...

متن کامل

Kinetics of Austenite Recrystallization during the Annealing of Cold-rolled Fe-Mn-Al-C Steel

In the current study, the recrystallization behavior of 75% cold-rolled Fe-22Mn-10Al-1.4C steel during annealing at 750, 770, 790, 810, and 830°C was studied. X-ray diffraction patterns and optical microscopy were used to characterize microstructures. The Vickers Micro-hardness test was used to characterize recrystallization kinetics during annealing. Johnson-Mehl-Avrami-Kolmogorov (JMAK) model...

متن کامل

PREDICTION OF CRITICAL STRESS AND STRAIN FOR THE ONSET OF DYNAMIC RECRYSTALLIZATION IN PLAIN CARBON STEELS

The aim of the present study is the prediction of critical conditions (including critical strain and flow stress) for the initiation of dynamic recrystallization during thermo-mechanical processing of plain carbon steels. For this propose, torsion tests were conducted at different temperature (1050, 1100 and 1150˚C) and strain rates (0.002, 0.02 and 0.2/s). All flow curves showed a peak st...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Metallofizika I Noveishie Tekhnologii

سال: 2021

ISSN: ['1024-1809', '2617-1511']

DOI: https://doi.org/10.15407/mfint.43.02.0235