Mathematical Model for Solar Drying of Grains
نویسندگان
چکیده
منابع مشابه
selection of a relevant mathematical model for drying of tomato slices using solar dryer
in this research, solar drying of a thin layer of tomato slices was evaluated. the experiments were carried out at the air velocities of 0.5 and 1.0 m s-1 and thicknesses of 3, 5 and 7 mm. in order to find the most suitable form of thin layer drying model, nine different mathematical drying models were fitted to the experimental data to determine the pertinent coefficients of each model. the go...
متن کاملDevelopment of Solar Drying Model for Selected Cambodian Fish Species
A solar drying was investigated as one of perspective techniques for fish processing in Cambodia. The solar drying was compared to conventional drying in electric oven. Five typical Cambodian fish species were selected for this study. Mean solar drying temperature and drying air relative humidity were 55.6 °C and 19.9%, respectively. The overall solar dryer efficiency was 12.37%, which is typic...
متن کاملmathematical modeling of forced convection thin layer solar drying for cuminum cyminum
this paper presents mathematical models of thin layer forced convection solar drying of cuminum cyminum using two drying methods (mixed and indirect) at different operating conditions. the average initial moisture content of the seeds for all tests was about 43% d.b. and the drying was performed continuously, in each test, for a uniform period of 90 minutes drying time in a solar cabinet dryer ...
متن کاملindirect and mixed mode solar drying mathematical models for sultana grape
many research studies have been performed on forced convection (active) solar dryers for fruit and vegetables. a short survey of these showed that applying the forced convection solar dryer not only significantly reduced the drying time but also resulted in many improvements in the quality of the dried products. active indirect and mixed-mode thin layer solar drying experiments were conducted o...
متن کاملinvestigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Engineering Research and Reports
سال: 2019
ISSN: 2582-2926
DOI: 10.9734/jerr/2018/v3i316878