MATERIALS' INSERTION LOSS AT THREE FREQUENCY BANDS
نویسندگان
چکیده
منابع مشابه
Propagation Path Loss and Materials Insertion Loss in Indoor Environment at WiMAX Band of 3.3 to 3.6 GHz
The purpose of this study is to characterize the indoor channel for IEEE 802.16 (WiMAX) at 3.3 to 3.6 GHz frequency. This work presents a channel model based on measurements conducted in commonly found scenarios in buildings. These scenarios include closed corridor, wide corridor and semi open corridor. Path loss equations are determined using log-distance path loss model and a Rayleigh multipa...
متن کاملChannel Models and Beamforming at Millimeter-Wave Frequency Bands
Millimeter-wave (mm-wave) radios have been gaining interest as one of the strong enabling physical layer technologies for the fifth-generation (5G) mobile and backhaul access. This paper aims at clarifying possible roles of the mm-wave radios in the 5G development and performing comprehensive literature survey on the radio channel modeling for the feasibility study of a radio link. Emphasis in ...
متن کاملReturn Loss Measurement in the Presence of Variable Insertion Loss Using Optical Frequency Domain Reflectometry
The high spatial resolution and high sensitivity inherent to optical frequency domain reflectometery enables precise measurements of distributed insertion loss and return loss events. The ability to compensate return loss for variable insertion loss greatly adds to the accuracy and practicality of measurements. Further, the capability of measuring the Rayleigh backscatter internal to the instru...
متن کاملUltrasonic airborne insertion loss measurements at normal incidence (L).
Transmission loss and insertion loss measurements of building materials at audible frequencies are commonly made using plane wave tubes or as a panel between reverberant rooms. These measurements provide information for noise isolation control in architectural acoustics and in product development. Airborne ultrasonic sound transmission through common building materials has not been fully explor...
متن کاملAdiabatic Shear Bands in Functionally Graded Materials
The initiation and propagation of adiabatic shear bands (ASBs) in functionally graded materials (FGMs) deformed at high strain rates in plane-strain tension have been studied. An ASB is a narrow region, usually a few micrometers wide, of intense plastic deformation that forms after softening of the material due to its being heated up and the evolution of damage in the form of porosity has overc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Progress In Electromagnetics Research Letters
سال: 2013
ISSN: 1937-6480
DOI: 10.2528/pierl13040906