Material Selection and Fabrication Processes for Flexible Conformal Antennas
نویسندگان
چکیده
منابع مشابه
Design, Fabrication, and Testing of Flexible Antennas
Their light weight, low-cost manufacturing, ease of fabrication, and the availability of inex‐ pensive flexible substrates (i.e.: papers, textiles, and plastics) make flexible electronics an ap‐ pealing candidate for the next generation of consumer electronics [2]. Moreover, recent developments in miniaturized and flexible energy storage and self-powered wireless com‐ ponents paved the road for...
متن کاملFabrication and Measurement Techniques of Wearable and Flexible Antennas
When compared with other antenna types, flexible and wearable antennas are generally characterized by compactness, reconfigurability, flexibility, and durability. Therefore, the fabrication processes and materials used in flexible and wearable antennas are quite unconventional and need to be addressed and evaluated. Moreover, additional measurement setups and tuning methods are often required i...
متن کاملFrequency Reconfigurable Conformal Antennas for Wireless Networks
Frequency Reconfigurable antennas have received significant attention for their applications in communications, electronic surveillance and countermeasures, by adapting their properties to achieve selectivity in frequency, bandwidth, polarization and gain. This paper presents the design of reconfigurable conformal antenna for wireless LAN networks. The proposed antenna is suitable for Wireless ...
متن کاملMaterial Evaluation and Selection Processes to Enable Design for Manufacture
In order to optimize product designs it is necessary to quickly evaluate many candidate materials in terms of performance and processing costs. Evaluation using physical prototypes yields concrete results but is time intensive and costly when dealing with multiple optimization objectives. As an alternative, computer aided simulation is a reliable means of material evaluation and selection, is i...
متن کاملFabrication of a Flexible Amperometric Glucose Sensor Using Additive Processes.
This study details the use of printing and other additive processes to fabricate a novel amperometric glucose sensor. The sensor was fabricated using a Au coated 12.7 μm thick polyimide substrate as a starting material, where micro-contact printing, electrochemical plating, chloridization, electrohydrodynamic jet (e-jet) printing, and spin coating were used to pattern, deposit, chloridize, prin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Antennas and Propagation
سال: 2018
ISSN: 1687-5869,1687-5877
DOI: 10.1155/2018/9815631