Material model calibration for superplastic forming
نویسندگان
چکیده
منابع مشابه
Cavitation During Superplastic Forming
Cavitation is the opening of pores during superplastic forming, typically at grain boundary triple points or on second phase grain boundary particles during slip of grain boundaries. Theories for the initiation of cavitation are reviewed. It seems that cavitation is unlikely to occur by processes intrinsic to metals such as dislocation mechanisms or point defect condensation. It is proposed tha...
متن کاملOptimization of Superplastic Forming Technology
The objective of this paper is a superplastic forming (SPF) technologies design and optimization. The conditions of superplasticity are very sensitive to strain rates and temperature characteristic of deformation process. The presented work gives an approach to design the SPF technologies that satisfies such conditions.A possibility to decrease the temperature of the industrial forming of the T...
متن کاملThe Superplastic Forming of Bulk Metallic Glasses
Superplastic forming (SPF) is introduced in this article as a net-shape processing method for bulk metallic glasses (BMGs), commercially known as Liquidmetal® alloys. This method decouples fast cooling and forming of the BMG. Forming takes place in the supercooled liquid region, where the BMG exists as a highly viscous liquid and increases its fl uidity with increasing temperature. The SPF meth...
متن کاملSuperplastic Forming of Inconel Alloy 718spf
Superplasticforming (SPF) has become an important manufacturing method for aerospace and fuselage components. The basic reasons for the popularity of this process are reviewed and the compatibilityoffine-grained INCONELB alloy71 8SPF@ to superplasticforming are presented in this paper. The temperature limitations of current aluminum and titanium alloys employed in SPF parts for gas turbine comp...
متن کاملProcess Simulation for Optimizing Superplastic Forming of Sheet Metal
Superplastic forming (SPF) is conducted in a heated, pressurized die where direct monitoring of critical SPF parameters is extremely difficult. Numerical models provide a critical means of tracking the forming process, allowing the applied gas pressure to be adjusted to maintain optimum SPF behavior throughout the forming process. This paper describes how the MARC finite element code was used t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Inverse Problems in Science and Engineering
سال: 2018
ISSN: 1741-5977,1741-5985
DOI: 10.1080/17415977.2018.1489802