Material Formation in Electric Field and by Spark Plasma.
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Simulation of thermal and electric field evolution during spark plasma sintering
Finite element simulations have been conducted to determine the temperature distribution (both in radial and axial direction), heat and electric flux-field in the powder compact/die/punch assembly during the spark plasma sintering (SPS) process. A thermal–electrical coupled model with temperature dependent thermal and electrical properties is implemented. The simulation studies were conducted u...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولOn the source of plasma density and electric field perturbations in PMSE and PMWE regions
تشکیل ابرهای مسسفری در فصل تابستان و در ارتفاع ۸۰ تا ۹۰ کیلومتری از سطح زمین در نواحی قطبی دارای اهمیت بسیار زیادی می باشند. ارتباط مستقیم بین افزایش مشاهده این ابرها و پدیده گرم شدن کره زمین از دلایل اصلی اهمیت مطالعه این ناحیه می باشد. طبق تحقیقات انجام شده افزایش گازهای گلخانه ای باعث کاهش دما در این ناحیه از جو می شود. از طرف دیگر افزایش گاز متان و فرایند تجزیه آن توسط نور خورشید نیز باعث ا...
متن کاملComparison of Creep Behavior in Alumina Based Ceramics Densified by Spark Plasma Sintering and Hot Pressing
Spark plasma sintering (SPS) method, as plasma activated sintering, is a method applicable for rapid sintering of metals and ceramics. Owing to the advantage of rapid heating, the alumina ceramics obtained by SPS have a grain size and density comparable to those of hot pressed ones. The increase of densification rate may be related to some difference in ion transport characteristics. This study...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materia Japan
سال: 2000
ISSN: 1340-2625,1884-5843
DOI: 10.2320/materia.39.54