Material Deformation Behavior in T-Shape Hydroforming of Metal Microtubes
نویسندگان
چکیده
منابع مشابه
Mechanism of Improvement of Formability in Pulsating Hydroforming of T-shape Tubes
In this paper, the mechanism of improvement of formability in pulsating hydroforming of T-shape tubes is investigated by the finite element simulation and experiment. It is shown that local thinning was prevented by oscillating the internal pressure, because the protrusion is formed gradually by the prevention of sharp bulging. In the hydroforming, for the pulsating pressure, several steps occu...
متن کاملexperimental evaluation of collpase deformation behavior of a rockfill material
to investigate the saturation induced collapse deformation behavior of rockfill material, a set of large-scale triaxial tests were conducted in saturated and dry-saturated conditions. specimens were tested under various confining pressures. for dry-saturated tests, specimens were sheared in various stress levels. results of all dry saturated tests indicate a sudden reduction in the specimen vol...
متن کامل3D Ultrasonic Imaging for Sheet Metal Hydroforming
With fluid forming processes getting more and more common in industrial application a lot of research is carried out to analyze the forming behavior of sheet metal within these processes. In order to gather experimental information about the forming behavior of the workpiece, an imaging system is presented, that will allow determining the actual shape within the forming process. The system has ...
متن کاملNumerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming
Tube hydroforming (THF) process is used to produce the complex components from the initial cylindrical tubes. In this paper, T- shape component was formed using a tube hydroforming machine and the residual stresses of hydroformed tube was determined by hole drilling method. Subsequently, the thickness distribution and residual stresses of final tube were investigated using experimental and fini...
متن کاملNumerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming
Tube hydroforming (THF) process is used to produce the complex components from the initial cylindrical tubes. In this paper, T- shape component was formed using a tube hydroforming machine and the residual stresses of hydroformed tube was determined by hole drilling method. Subsequently, the thickness distribution and residual stresses of final tube were investigated using experimental and fini...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2020
ISSN: 2075-4701
DOI: 10.3390/met10020199