Mass transfer efficiency of a tall and low plate free area liquid pulsed sieve-plate extraction column

Mass Transfer Coefficients in Pulsed Perforated-plate Extraction Columns

This study examined the mass transfer performance in a pulsed perforated-plate extraction column with diameter of 50 mm using two different liquid systems. Mass transfer coefficients have been interpreted in terms of the axial diffusion model. The effects of pulsation intensity and dispersed and continuous phase velocities on the mass transfer performance have been investigated. Three different...

Investigation of Packing Effect on Mass Transfer Coefficient in a Single Drop Liquid Extraction Column

MHD ‎r‎otating heat and mass transfer free convective flow past an exponentially accelerated isothermal plate with fluctuating mass ‎diffusion

In this paper, we have considered the problem of rotating, magnetohydrodynamic heat and mass transfer by free convective flow past an exponentially accelerated isothermal vertical plate in the presence of variable mass diffusion. While the temperature of the plate is constant, the concentration at the plate is considered to be a linear function with respect to time t. The plate is assumed to be...

Hydraulic Measurements of Sieve Plate

A measurement device for sieve plates have been designed and built at Helsinki University of Technology. The unit consists of a rectangular transparent container where one plate is installed. The flow path on the plate is of constant width. The plate is easy to change and sieve plates with two different diameters of holes have already been measured. The measurements have been done with two syst...

Mass Transfer Coefficients in Pulsed Column for Separation of Samarium and Gadolinium

The mass transfer performance of a pulsed disc and doughnut column for extraction of samarium and gadolinium from aqueous nitrate solution with D2EHPA was investigated. The effects of operating parameters such as pulsation intensity, continuous and dispersed phase velocities on column performance were investigated. The axial dispersion model was used to obtain the overall mass transfer coef...