Mash Seam Welding of Low Carbon Steel Sheet
نویسندگان
چکیده
منابع مشابه
Optimization of the parameters of low-carbon steel (EN10130) welding using friction stir welding method
Friction-stir welding process is a novel method of solid state welding, which produces heat due to friction between the pin, the shoulder and the workpiece. This heat causes a paste area. Shoulder pressure and pin spin cause edges integration and lead to welding. In this study, firstly, the feasibility of welding of steel sheet (EN10130) with a thickness of 1.5mm has been tested by 58 experim...
متن کاملoptimization of the parameters of low-carbon steel (en10130) welding using friction stir welding method
friction-stir welding process is a novel method of solid state welding, which produces heat due to friction between the pin, the shoulder and the workpiece. this heat causes a paste area. shoulder pressure and pin spin cause edges integration and lead to welding. in this study, firstly, the feasibility of welding of steel sheet (en10130) with a thickness of 1.5mm has been tested by 58 experimen...
متن کاملSimulation of effective parameters on low-carbon steel laser welding process using finite element method
In this paper, laser beam welding of a rectangular piece of steel was simulated using Fluent software. Physical properties of analytical field was constant and its changes with temperature was ignored. In the present work, effect of tool speed and laser power on temperature distribution of workpiece surface and different deeps in the plane of symmetry and also maximum of temperature and depth o...
متن کاملSimulation of effective parameters on low-carbon steel laser welding process using finite element method
In this paper, laser beam welding of a rectangular piece of steel was simulated using Fluent software. Physical properties of analytical field was constant and its changes with temperature was ignored. In the present work, effect of tool speed and laser power on temperature distribution of workpiece surface and different deeps in the plane of symmetry and also maximum of temperature and depth o...
متن کاملDissimilar Welding of EN 10025 Carbon Steel to AISI 316L Stainless Steel by Friction Stir Welding
In the present Study, a dissimilar joint of carbon steel sheet EN 10025 with 316 L has been welded by FSW and the welding parameters were optimized by RSM software method. For investigation of mechanical properties and microstructural analysis carried out by using optical, scanning electron microscopes with EDS analysis, tensile and hardness test of different area of joints, SZ, TMAZ, HAZ, thei...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Welding Society
سال: 1958
ISSN: 0021-4787,1883-7204
DOI: 10.2207/qjjws1943.27.26