Martensitic Transformation and Microstructure of Sputter-Deposited Ni–Mn–Ga Films

Physical Properties of Reactively Sputter-Deposited C-N Thin Films

This work aims to prepare and study amorphous carbon nitride (CNx) films. Films were deposited by reactive magnetron radiofrequency (RF) sputtering from graphite target in argon and nitrogen mixture discharge at room temperature. The ratio of the gas flow rate was varied from 0.1 to 1. Deposited films were found to be amorphous. Highest Nitrogen concentration achieved was 42 atomic percent whic...

Growth, structure and stability of sputter-deposited MoS2 thin films

Molybdenum disulphide (MoS2) thin films have received increasing interest as device-active layers in low-dimensional electronics and also as novel catalysts in electrochemical processes such as the hydrogen evolution reaction (HER) in electrochemical water splitting. For both types of applications, industrially scalable fabrication methods with good control over the MoS2 film properties are cru...

Sputter-deposited Sma Thin Films: Properties and Applications

Shape memory alloy (SMA) thin films formed by sputter deposition have attracted considerable attention in the last decade. Current intensive research demonstrated that thin films' unique fine microstructure is responsible for superior shape memory characteristics in films, compared to that of bulk materials. Simultaneously, much effort has been taken in the development and fabrication of microd...

Metal-to-insulator transition in sputter deposited 3NiÕAl thin films

Effects of Cu on the microstructural and mechanical properties of sputter deposited Ni-Ti thin films

The microstructure of sputter deposited Ti-rich Ni-Ti thin films doped with Cu in the range 020.4 at.% and annealed for 1 h at 500 and 600°C has been investigated and correlated with the mechanical properties of the films measured by depth-sensing nanoindentation. X-ray diffraction analysis showed the microstructural evolution of Ni-Ti thin films when doped with Cu and annealed at different tem...