Manufacturing polymer/carbon nanotube composite using a novel direct process
نویسندگان
چکیده
منابع مشابه
Composite Manufacturing Process Selection Using Analytical Hierarchy Process
This paper describes an approach, based on the analytical hierarchy process (AHP) that assists decision makers or manufacturing engineers determining the most appropriate manufacturing process to be employd in manufacturing of composite automotive bumper beam at the early stage of product development process. There are 5 types of processes under consideration namely injection moulding (IM), res...
متن کاملManufacturing Process of a Novel Biomass Composite Inspired from Cellular Structure of Wood
A novel biomass composite inspired from wood porous structure was manufactured by impregnating vinyl monomer into wood cellular structure under vacuum conditions, and initiating the monomer for in situ polymerization through a thermal treatment. The vacuum condition was studied, and the mechanical properties of the composite were also tested. SEM observation shows that polymer generated in the ...
متن کاملDirect-Write Drawing of Carbon Nanotube/Polymer Composite Microfibers
1Department of Mechanical Engineering, University of Louisville, 200 Sacket Hall, Louisville, KY 40292, USA 2The Electrooptics Research Institute and Nanotechnology Center, University of Louisville, Louisville, KY 40292, USA 3Department of Biomedical Engineering, University of Wisconsin-Madison, 6036 WIMR, 1111 Highland Avenue, Madison, WI 53705, USA 4Department of Bioengineering, University of...
متن کاملNovel Manufacturing Technolory of Polymeric Nanocomposites Using Supercritical Fluid Process
Recently, Supercritical fluids have been used in material synthesis and processing because of their special properties such as high diffusivity, low viscosity, and low surface tension. Supercritical carbon dioxide is the most attractive because it is non-toxic, non-flammable, and has moderate critical temperature and critical pressure. Moreover, and can also swell most polymers. In this study, ...
متن کاملNanotube Composite Carbon Fibers
The mechanical properties of materials in small rod-shaped form are of considerable technological interest since, due to their shape and size, they can exhibit appreciably greater strength relative to corresponding macroscopic forms. For example, the mechanical strength of silicon carbide whiskers systematically increases with decreasing whisker diameter over the 100 to 1 micron range. This phe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nanotechnology
سال: 2011
ISSN: 0957-4484,1361-6528
DOI: 10.1088/0957-4484/22/14/145302