Manufacturing and compatibilization of PLA/PBAT binary blends by cottonseed oil-based derivatives
نویسندگان
چکیده
منابع مشابه
Performance and Emission Characteristics of a Diesel Engine with Cottonseed Oil Plus Diesel Oil Blends
aIn the present study a 4-stroke 5hp diesel engine was tested with Diesel oil plus cottonseed oil blends. The blends in different proportions (10 to 50 percent by volume) were tested at constant speed of 1500 rpm. The said engine is operated at different loads and characteristics like Brake power, Brake thermal efficiency, specific fuel consumption etc. Engine performance for blends resulted in...
متن کاملCompatibilization of polycarbonate/poly (ethylene terephthalate) blends by addition of their transesterification product
In this study, poly carbonate (PC) and poly (ethylene terephthalate) (PET) were reactive melt-blended under two different conditions to produce PC/PET copolymers. For each condition, samples were taken at specified mixing times representative a specific structure of copolymers and each one employed to physically compatibilize a PC/PET blend with a fixed composition. Reactive blending and copoly...
متن کاملCompatibilization of immiscible polymer blends using graphene oxide sheets.
By taking the advantage of the unique amphiphilic structure of graphene oxide sheets (GOSs), we develop here a new and effective strategy for compatibilizing immiscible polymer blends. With the incorporation of only 0.5 wt % GOSs into immiscible polyamide/polyphenylene oxide (PA/PPO, 90/10) blends, the droplet diameter of the dispersed minor phase (PPO) is dramatically reduced by more than 1 or...
متن کاملPerformance of Pre-heated Cottonseed Oil and Diesel Fuel Blends in a Compression Ignition Engine
Viscosity of vegetable oil is considered a constraint for its use as an alternate fuel for Internal Combustion(IC) engines. In this experimental investigation, the viscosity of cottonseed oil (CSO), which is considered a potential alternate fuel, is reduced by blending it in different proportions with diesel, and its viscosity at various temperatures was analyzed and used as a fuel in a compres...
متن کاملMorphology and Mechanical Properties Investigation of Binary Polymer Blends Based on PP/SEBS and PP/PC
In this study, eight binary blends of polypropylene (PP)/ poly [styrene-b-(ethylene-co butylene)-b-styrene] tri-block copolymer (SEBS) and polypropylene (PP)/ polycarbonate (PC) were produced at different composition through twin screw extruder. The composition of the minor phases was changed to correlate the morphology and mechanical properties of binary blends (PP/PC and PP/SEBS) through ther...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Express Polymer Letters
سال: 2018
ISSN: 1788-618X
DOI: 10.3144/expresspolymlett.2018.69