Manufacturing and Characterization of Tube-Filled ZA27 Metal Foam Heat Exchangers
نویسندگان
چکیده
This study investigates the heat transfer performance of a novel ZA27 metal foam exchanger. An open-celled is combined with thin-walled copper tube in single-step casting process. The between two separated water streams flowing through and foam, respectively, measured compared to an equivalent shell exchanger arrangement. Heat enhancement up 71% rate exceeding 30 kW are observed attributed increased surface area metallic foam. However, overall was limited by inefficient internal mass stream tube.
منابع مشابه
Thermal-Hydraulic Performance of Metal Foam Heat Exchangers
Due to their large surface-area-to-volume ratio and tortuous structure, metal foams hold promise for heat transfer applications. Both of these factors increase the heat transfer by enhancing the mixing and surface area. The main disadvantage associated with their thermal-hydraulic performance is relatively higher pressure drop, resulting in larger pumping power requirements if they are used in ...
متن کاملEffectively Design Shell-and-Tube Heat Exchangers
heat exchangers (STHEs) is done by sophisticated computer software. However, a good understanding of the underlying principles of exchanger design is needed to use this software effectively. This article explains the basics of exchanger thermal design, covering such topics as: STHE components; classification of STHEs according to construction and according to service; data needed for thermal de...
متن کاملFull Analysis of Low Finned Tube Heat Exchangers
In this paper, first the governing parameters characterizing low-finned tubes are reviewed. Second, the more important of the available performance correlations are compared with the available experimental data. The most reliable one can be employed to develop a pressure drop relationship, which has already been used in an algorithm for exchanger sizing. Also a means for the identification of a...
متن کاملThermal Design Considerations and Performance Evaluation of Cryogenic Tube in Tube Heat Exchangers
Heat exchangers are the most important equipment in refrigeration processes. Design and modeling of heat exchangers operating at low temperatures are different from other regular heat exchangers. This study includes two sections. In the first section, design and modeling considerations needed for evaluating the real thermal behavior of heat exchangers at low temperatures were discussed. The...
متن کاملA synthesis of fluid and thermal transport models for metal foam heat exchangers
Metal foam heat exchangers have considerable advantages in thermal management and heat recovery over several commercially available heat exchangers. In this work, the effects of micro structural metal foam properties, such as porosity, pore and fiber diameters, tortuosity, pore density, and relative density, on the heat exchanger performance are discussed. The pertinent correlations in the lite...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2021
ISSN: ['2075-4701']
DOI: https://doi.org/10.3390/met11081277