Manufacture of cordierite foams by direct foaming

Understanding foams & foaming

Most of the common foams are a two-phase medium of gas and liquid with a particular structure consisting of gas pockets trapped in a network of thin liquid lms and plateau borders. Some well known foams are bubble baths, dishwater detergents and the foam head on beers. Many oils foam when trapped gas is suddenly released under conditions of an abrupt drop in pressure. In some re ners in which t...

Simulation of Foaming and Deformation for Composite Aluminum Foams

In this study, at the first stage, the rupture criterion of bubbles wall in Aluminum metal foam liquid was investigated by using Lattice Boltzmann. The two phases modeling were accomplished by using a modified Shan-Chen model. This model was run for several bubbles in A356+3wt.%SiC melt system. Then, bubbles morphologies (virtual metallographic) for A356+3wt.%SiC foams were simulated. Results s...

Foaming Behaviour, Structure, and Properties of Polypropylene Nanocomposites Foams

This work presents the preparation and characterization of compression-moulded montmorillonite and carbon nanofibrepolypropylene foams. The influence of these nanofillers on the foaming behaviour was analyzed in terms of the foaming parameters and final cellular structure and morphology of the foams. Both nanofillers induced the formation of a more isometric-like cellular structure in the foams...

A novel monolithic microactuator fabricated by 3D rapid direct manufacture

In this paper we present the world’s first micropump entirely fabricated using a 3D direct manufacture process based on microstereolithography. The device employs a single pneumatically actuated membrane, with flow rectification provided by a nozzle/diffuser arrangement. A maximum flow rate of just over 2,000 μl/min was achieved with a pneumatic pressure of 2 PSIG and a stroke rate of 96 Hz. Th...

Influence of Milled Waste Glass to Clay Ceramic Foam Properties Made by Direct Foaming Route