Malachite green dye removal using ceramsite-supported nanoscale zero-valent iron in a fixed-bed reactor

نویسندگان

چکیده

Abstract In this study, we prepared and characterized ceramsite-supported nanoscale zero-valent iron (nZVI). Malachite green (MG) dye removal from aqueous solutions using a fixed-bed reactor packed with the above composite material was investigated. This research carried out according to prophase study of preparation characterization ceramsite for water treatment sintering method solid wastes. The results indicated that could be loaded nZVI, mainly because its magnetic property. With decrease in initial concentration influent flow rate or increase reaction temperature, breakthrough curve became less steep. Meanwhile, saturation points gradually shifted rightward. When 10 mg·L −1 , temperature 25°C, 5 mL·min presented an irregular “S” shape, times were 230 515 h, respectively. MG dye-containing wastewater nZVI by employing Yoon-Nelson kinetic model superior those Thomas Adams-Bohart models, R 2 > 0.96.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Removal of Acid Red 18 dye from Aqueous Solutions Using Nanoscale Zero-Valent Iron

Background and Purpose:Organic dyes with a complex structure are often toxic, carcinogenic, mutagenic, non-biodegradation and stable in the environment and if released to the environment without treatment can endanger the environment and human health. The aim was to evaluate the performance nanoscalezero-valent iron (NZVI) in the removal of dye acid red 18 (AR18) from aqueous solutions. Materia...

متن کامل

removal of acid red 18 dye from aqueous solutions using nanoscale zero-valent iron

background and purpose:organic dyes with a complex structure are often toxic, carcinogenic, mutagenic, non-biodegradation and stable in the environment and if released to the environment without treatment can endanger the environment and human health. the aim was to evaluate the performance nanoscalezero-valent iron (nzvi) in the removal of dye acid red 18 (ar18) from aqueous solutions. materia...

متن کامل

Aqueous phosphate removal using nanoscale zero-valent iron

Nanoscale zero-valent iron (NZVI) particles have been used for the remediation of a wide variety of contaminants. NZVI particles have high reactivity because of high reactive surface area. In this study, NZVI slurry was successfully used for phosphate removal and recovery. Batch studies conducted using different concentrations of phosphate (1, 5, and 10 mg PO4 -P/L with 400 mg NZVI/L) removed *...

متن کامل

The removal of uranium onto carbon-supported nanoscale zero-valent iron particles

In the current work carbon-supported nanoscale zero-valent iron particles (CS nZVI), synthesised by the vacuum heat treatment of ferric citrate trihydrate absorbed onto carbon black, have been tested for the removal of uranium (U) from natural and synthetic waters. Two types of CS nZVI were tested, one vacuum annealed at 600 °C for 4 h and the other vacuum annealed at 700 °C for 4 h, with their...

متن کامل

Removal of Cr(VI) from Water Using a New Reactive Material: Magnesium Oxide Supported Nanoscale Zero-Valent Iron

The chromium pollution of water is an important environmental and health issue. Cr(VI) removal by means of metallic iron is an attractive method. Specifically, nanoscopic zero valent iron (NZVI) shows great reactivity, however, its applicability needs to be further investigated. In the present paper, NZVI was supported on MgO grains to facilitate the treatments for remediation of chromium-conta...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Green Processing and Synthesis

سال: 2022

ISSN: ['2191-9542', '2191-9550']

DOI: https://doi.org/10.1515/gps-2022-0024