Magnetohydrodynamic natural convection of second-grade hybrid nanofluid on variable heat flux surface

نویسندگان

چکیده

The natural convection flow of a second-grade hybrid nanofluid along vertical plate is investigated. effects variable heat flux and magnetic field are considered. governing equations for the momentum energy transport reduced to dimensionless equations. finite difference method used solve obtained by stream-function formulation. A comparison between present results relevant published gives good agreement. For higher volume fraction copper magnetite nanoparticles, index parameter flux, Deborah number, coefficient skin friction decreases; however, transfer increases. converse observed increasing Eckert number. velocity temperature increase larger number decrease parameter. Moreover, parameter, augment thicknesses thermal boundary layers.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Variable Thermal Expansion Coefficient and Nanofluid Properties on Steady Natural Convection in an Enclosure

Steady state natural convection is numerically investigated in an enclosure using variable thermal conductivity, viscosity and thermal expansion coefficient of Al2O3–water nanofluid. This study has been conducted for a wide range of Rayleigh numbers (103≤ Ra ≤ 106), concentrations of nanoparticles (0% ≤ Φ ≤ 7%), enclosure aspect ratios (0.5 ≤ AR ≤ 2) and temperature differences between the cold...

متن کامل

Effects of variable viscosity and thermal conductivity of Al2O3–water nanofluid on heat transfer enhancement in natural convection

Article history: Received 18 November 2008 Received in revised form 9 February 2009 Accepted 10 February 2009 Available online xxxx

متن کامل

MHD Natural Convection and Entropy Generation of Variable Properties Nanofluid in a Triangular Enclosure

Natural convection heat transfer has many applications in different fields of industry; such as cooling industries, electronic transformer devices and ventilation equipment; due to simple process, economic advantage, low noise and renewed retrieval. Recently, heat transfer of nanofluids have been considered because of higher thermal conductivity coefficient compared with those of ordinary fluid...

متن کامل

Nanofluid forced convection through a microtube with constant heat flux and slip boundary

    Given the need to increase the efficiency of heat transfer in thermal systems, especially systems using nanofluids in microscale and nanoscale heat transfer equipment ideas to improve their performance is very good.In present study, the flow and heat transfer of Water-Cu nanofluid in micro-tube with slip regime with constant wall heat flux numerically simulated with low Reynolds numbers. Sl...

متن کامل

CFD analysis of natural convection heat transfer in a square cavity with partitions utilizing Al2O3 nanofluid

In the present study, natural convective heat transfer in a partitioned square cavity utilizing nanofluids is studied. The vertical left and right walls are considered as the hot and cold walls, respectively and the partitions assumed to be adiabatic. The nanofluid used in this study is Al2O3 with the volume fraction of 20%. It is assumed that nanofluid is a single phase f...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: AIP Advances

سال: 2022

ISSN: ['2158-3226']

DOI: https://doi.org/10.1063/5.0089143