Magnetoelastic Humidity Sensors with TiO2 Nanotube Sensing Layers
نویسندگان
چکیده
منابع مشابه
Nanosized Thin SnO2 Layers Doped with Te and TeO2 as Room Temperature Humidity Sensors
In this paper the humidity sensing properties of layers prepared by a new method for obtaining doped tin oxide are studied. Different techniques-SEM, EDS in SEM, TEM, SAED, AES and electrical measurements-are used for detailed characterization of the thin layers. The as-deposited layers are amorphous with great specific area and low density. They are built up of a fine grained matrix, consistin...
متن کاملEffects of Functionalization of TiO2 Nanotube Array Sensors with Pd Nanoparticles on Their Selectivity
This study compared the responses of Pd-functionalized and pristine titanate (TiO2) nanotube arrays to ethanol with those to acetone to determine the effects of functionalization of TiO2 nanotubes with Pd nanoparticles on the sensitivity and selectivity. The responses of pristine and Pd-functionalized TiO2 nanotube arrays to ethanol gas at 200 °C were ~2877% and ~21,253%, respectively. On the o...
متن کاملSelective microwave sensors exploiting the interaction of analytes with trap states in TiO2 nanotube arrays.
Sensing of molecular analytes by probing the effects of their interaction with microwaves is emerging as a cheap, compact, label-free and highly sensitive detection and quantification technique. Microstrip ring-type resonators are particularly favored for this purpose due to their planar sensing geometry, electromagnetic field enhancements in the coupling gap and compatibility with established ...
متن کاملHigh sensitivity flexible Lamb-wave humidity sensors with a graphene oxide sensing layer.
This paper reports high performance flexible Lamb wave humidity sensors with a graphene oxide sensing layer. The devices were fabricated on piezoelectric ZnO thin films deposited on flexible polyimide substrates. Two resonant peaks, namely the zero order antisymmetric (A0) and symmetric (S0) mode Lamb waves, were observed and fitted well with the theoretical analysis and modelling. With graphen...
متن کاملThe Development of Love Wave-Based Humidity Sensors Incorporating Multiple Layers
A Love wave humidity sensor is developed by using a multilayer structure consisting of PVA/SiO2 layers on an ST-90°X quartz substrate. The theoretical result shows that the sensor with such a two-layer structure can achieve a higher sensitivity and a smaller loss than the structures with a single polymer layer. Comparative experiments are performed for the sensor incorporating PVA/SiO2 layers a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2020
ISSN: 1424-8220
DOI: 10.3390/s20020425