Magnetically Geared Induction Machines

A Novel Flux Focusing Magnetically Geared Machine with Reduced Eddy Current Loss

Jin Liu 1,2, Wenxiang Zhao 1,2,*, Jinghua Ji 1,2, Guohai Liu 1,2 and Tao Tao 1,2 1 School of Electrical and Information Engineering, Jiangsu University, Zhenjiang 212013, China; [email protected] (J.L.); [email protected] (J.J.); [email protected] (G.L.); [email protected] (T.T.) 2 Jiangsu Key Laboratory of Drive and Intelligent Control for Electric Vehicle, Zhenjiang 212013, China * Corresponde...

Induction and State Machines

This short paper describes a well-known and a non-standard technique for proving properties about sequential circuits. The techniques are based on transforming the circuit to an abstract state machine, and performing several ways of induction on these state machines. We conclude with an insightful correspondence between the two techniques. The proposed methods have been implemented in an experi...

Noise of Induction Machines

Sensorless Control of Induction Machines

theoret. zero close to, or temporarily zero Abstract — Controlled induction motor drives without mechanical speed sensors at the motor shaft have the attractions of low cost and high reliability. To replace the sensor, the information on the rotor speed is extracted from measured stator currents and from the voltages at the motor terminals. Vector controlled drives require estimating the magnit...

Parameter Identification Using ANFIS for Magnetically Saturated Induction Motor

The problem of controlling the π-model induction motor with magnetic saturation is considered in this paper. The motor parameters such that stator resistance Rs, rotor resistance Rr and load torque TL can be varied during the operation, many techniques are used for online identification of the motor parameters. In this paper, the authors use a new technique which is the Adaptive Neuro Fuzzy Inf...