Magnetic properties of iron nitride-alumina nanocomposite materials prepared by high-energy ball milling
نویسندگان
چکیده
منابع مشابه
Ion Transport Properties of the Inverse Perovskite BaLiF3 Prepared by High-Energy Ball Milling
For many applications such as advanced energy storage systems, chemical sensors or electrochromic devices fast ionic conduction plays an important role. In many cases, see e.g., Refs. [1-3], nanocrystal-line ceramics with crystallite diameters smaller than 50 nm show an enhanced ion conductivity compared to their coarse-grained counterparts, i.e., single crystals or materials with µm-sized part...
متن کاملPreparation and Characterization of Hydroxyapatite/Alumina Nanocomposites by High-Energy Vibratory Ball Milling
Hydroxyapatite/alpha-alumina composites were prepared by means of high-energy vibratory ball milling. The effect of the addition of alumina, from 5 to 25 wt%, was investigated. x-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) results indicated thathydroxyapatite andaluminawere themajorphases aftermechanicalmilling and only small peak shifts were observed. Transmission...
متن کاملPhonon density of states of nanocrystalline Fe prepared by high-energy ball milling
We performed inelastic neutron scattering measurements on nanophase Fe powders prepared by high-energy ball milling. Neutron energy loss spectra were measured for two states of the material: ~1! as milled, when the material had a characteristic nanocrystallite size of 12 nm; and ~2! annealed, when the material had a characteristic crystallite size of 28 nm. The longitudinal peak in the phonon d...
متن کاملAtomic-scale structure of nanocrystalline ZrO2 prepared by high-energy ball milling
The atomic-scale structure of nanocrystalline ZrO2 obtained by ball milling has been studied using highenergy x-ray diffraction and the atomic pair distribution function technique. The studies show that, upon relatively short milling times, the parent crystalline material, monoclinic ZrO2, evolves into a nanocrystalline phase that is locally similar to monoclinic zirconia but shows a cubic-type...
متن کاملFormation of glassy Ti50Cu20Ni24Si4B2 alloy by high-energy ball milling
The elemental powder mixtures with a nominal composition of Ti50Cu20Ni24Si4B2 can be amorphized under high-energy ball milling. A well-defined glass transition before crystallization appears in the obtained amorphous phase during heating in a differential scanning calorimeter. Awide supercooled liquid region DTx is available to be about 57 K. Crystallization of the ballmilled amorphous phase wa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The European Physical Journal D - Atomic, Molecular and Optical Physics
سال: 2003
ISSN: 1434-6060,1434-6079
DOI: 10.1140/epjd/e2003-00146-1