Magnetic Properties of Fe-Based Amorphous Powder Cores Produced by the Cold-Pressing Method.
نویسندگان
چکیده
منابع مشابه
Effect of Ribbon Width on the Magnetic Properties of Fe- based Amorphous Cores
The effects of different ribbon widths on the magnetic properties of an amorphous alloy were studied. DSC, TGA, XRD, VSM, SEM and ER techniques were used. For SA1 alloy, the sample during primary crystallization for the 142mm and 213mm width ribbons are quite similar; however the magnetic properties and morphologies are significantly different. Finally, the measurements of a three-phase 2MVA am...
متن کاملA Comparative Study of Insulators on Magnetic Properties of Sendust Based Nanocomposite Powder Cores
In this study, Sendust (Fe85Si9.6Al5.4) nanostructure alloy was prepared bymechanical alloying and was characterized by X-ray diffraction. In addition, the alloy’smorphology and its distribution particle size were investigated by scanning electronmicroscopy method. The alloyed powders were insulated with 4wt% of three differentinsulating materials including polyvinyl alc...
متن کاملcontrol of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولMAGNETIC PROPERTIES OF AMORPHOUS Fe-Ti ALLOYS PRODUCED BY FACING TARGET TYPE SPUTTERING
In bulk FeTi alloys prepared by facing target type sputtering, an amorphous phase was obtained between 25 and 75 at% Ti. These alloys are weak itinerant electron ferromagnets and the Curie temperature decreases with increasing Ti concentration and becomes zero at about 60 at% Ti.
متن کاملMagnetic Properties of Pr–Fe–Al Alloys Produced by the Metallic Mold Casting Method
The structures and magnetic properties of Pr–Fe–Al alloys produced by the metallic mold casting method were investigated. The Pr–Fe–Al alloy consisted of the amorphous phase together with the non-ferromagnetic Pr phase. Magnetic measurements confirmed that the origin of coercivity in the alloys was the amorphous phase. It was found that the Curie temperature and coercivity of the alloys were st...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Magnetics Society of Japan
سال: 2002
ISSN: 0285-0192
DOI: 10.3379/jmsjmag.26.513