Magnetic Characteristics and Shape Memory Effects on the Fe Based Shape Memory Alloy Ribbon
نویسندگان
چکیده
منابع مشابه
Magnetic Shape Memory Alloy and Actuator Design
In the field of micromechatronics, microrobotics and specially microfactories, active materials are used in most cases. They permit high resolution and distributed actuation. In this area, Magnetic Shape Memory Alloys (MSMA) are possible candidates. If a lot of studies deal with MSMA, only few applications use them until now. MSMA are attractive active materials because they have large strain (...
متن کاملExperimental Study on the Magnetomechanical Characteristics of Ni-Mn-Ga Ferromagnetic Shape Memory Alloy Single Crystals
Magnetic shape memory properties of Ni-Mn-Ga single crystals were characterized by measurement of stress-induced martensite reorientation under constant magnetic fields. Also magnetic field-induced strain as a function of the applied magnetic field under different constant compressive stress levels has been investigated. All the experiments were performed at room temperature in which the sample...
متن کاملEffects of Cold-Rolling/Aging Treatments on the Shape Memory Properties of Ti49.3Ni50.7 Shape Memory Alloy
In this study, the combined effects of strengthening, precipitates, and textures on the shape recovery ability and superelasticity of thermomechanically treated Ti49.3Ni50.7 shape memory alloy (SMA) in both the rolling and transverse directions were studied by experimental measurements and theoretical calculations. Experimental results and theoretical calculations showed that the 300 °C × 100 h...
متن کاملNonlinear Hamiltonian modelling of magnetic shape memory alloy based actuators
This paper proposes an application of the Lagrangian formalism and its Hamiltonian extension to design, model and control a mechatronic system using Magnetic Shape Memory Alloys. In this aim, an original dynamical modelling of a Magnetic Shape Memory Alloy based actuator is presented. Energy-based techniques are used to obtain a coherent modelling of the magnetical, mechanical and thermodynamic...
متن کاملShape Memory Properties in Cu-Zn-Al Alloy
In this research a Cu-Zn-Al alloy is produced by melting the raw materials in an electric resistance furnace and then pouring it into a steel mould. The optimum way to achieve the final analysis in the hypo-eutectoid range is determined and the influence of the alloying element, Ti on the grain size and the shape memory properties of the samples are investigated. Solution treatment (done at 850...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Fundamentals and Materials
سال: 1999
ISSN: 0385-4205,1347-5533
DOI: 10.1541/ieejfms1990.119.4_522