Magnet loss analysis for a high-speed PM machine with segmented PM and modified tooth-tips shape

Designing a Coreless High-Speed Axial-Flux PM Generator for Microturbines

Finite Element Method Simulation and Comparison of a Segmented-PM Motor and a Whole-PM motor

A permanent magnet synchronous motor (PMSM) with rotor embedded segmented permanent magnet was analyzed. The structural features and flux weakening principle are introduced. The shape of the rotor is optimized to get a sinusoidal air gap magnetic density waveform and reduce the toque ripple. The whole-permanent-magnet (PM) motor and the segmented-permanent-magnet motor are compared from the asp...

Performance Analysis and Modeling of a Tubular Staggered-Tooth Transverse-Flux PM Linear Machine

Abstract: This paper investigates the performance analysis and mathematical modeling of a staggered-tooth transverse-flux permanent magnet linear synchronous machine (STTF-PMLSM), which is characterized by simple structure and low flux leakage. Firstly, the structure advantages and operation principle of the STTF-PMLSM are introduced, and a simplified one phase model is established to investiga...

A novel PM motor with hybrid PM excitation and asymmetric rotor structure for high torque performance

This paper proposes a novel permanent magnet (PM) motor for high torque performance, in which hybrid PM material and asymmetric rotor design are applied. The hybrid PM material is adopted to reduce the consumption of rare-earth PM because ferrite PM is assisted to enhance the torque production. Meanwhile, the rotor structure is designed to be asymmetric by shifting the surface-insert PM (SPM), ...

Design and Development of Three Phase Permanent Magnet Brushless DC (PM BLDC) Motor for Variable Speed

A major part of the power consumption in the low-wattage reciprocating compressors, used for household refrigeration units, is associated with the motor. A variable speed compressor as opposed to a single speed compressor is known to provide energy savings due to its ability to match the load demand from the pump more closely to the power delivered by the pump. The current article presents an o...