Magnesium based surface metal matrix composites by friction stir processing
نویسندگان
چکیده
منابع مشابه
Characterization of Aluminum-Based-Surface Matrix Composites with Iron and Iron Oxide Fabricated by Friction Stir Processing
Surface composite layers were successfully fabricated on an A 1050-H24 aluminum plate by dispersed iron (Fe) and magnetite (Fe₃O₄) particles through friction stir processing (FSP). Fe and Fe₃O₄ powders were packed into a groove of 3 mm in width and 1.5 mm in depth, cut on the aluminum plate, and covered with an aluminum sheet that was 2-mm thick. A friction stir processing (FSP) tool of square ...
متن کاملsurface characteristics improvement of az31b magnesium by surface compositing with carbon nano-tubes through friction stir processing
in this research, the compositing of the surface of az31b magnesium alloy with cnt was studied by fsp. the parameters under study were rotational speed (500-1500 rpm), transverse speed (12-44 mm/min), number of passes (1-4), and cnt weight fraction (0-2%). microhardness testing, optical metallography, fesem, and eds analysis were employed for the characterization of the samples. the suitable li...
متن کاملFriction stir welding and processing
Friction stir welding (FSW) is a relatively new solid-state joining process. This joining technique is energy efficient, environment friendly, and versatile. In particular, it can be used to join high-strength aerospace aluminum alloys and other metallic alloys that are hard to weld by conventional fusion welding. FSW is considered to be the most significant development in metal joining in a de...
متن کاملProliferation and osteogenic differentiation of rat BMSCs on a novel Ti/SiC metal matrix nanocomposite modified by friction stir processing
The aims of this study were to fabricate a novel titanium/silicon carbide (Ti/SiC) metal matrix nanocomposite (MMNC) by friction stir processing (FSP) and to investigate its microstructure and mechanical properties. In addition, the adhesion, proliferation and osteogenic differentiation of rat bone marrow stromal cells (BMSCs) on the nanocomposite surface were investigated. The MMNC microstruct...
متن کاملOptimized process parameters for fabricating metal particles reinforced 5083 Al composite by friction stir processing
Metal matrix composites (MMCs) exhibit improved strength but suffer from low ductility. Metal particles reinforcement can be an alternative to retain the ductility in MMCs (Bauri and Yadav, 2010; Thakur and Gupta, 2007) [1,2]. However, processing such composites by conventional routes is difficult. The data presented here relates to friction stir processing (FSP) that was used to process metal ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Magnesium and Alloys
سال: 2016
ISSN: 2213-9567
DOI: 10.1016/j.jma.2016.02.001