Macrostructure, microstructure and mechanical properties of bobbin tool friction stir welded ZK60 Mg alloy joints
نویسندگان
چکیده
منابع مشابه
The Microstructure and Mechanical Properties of Friction Stir Welded Ti6al4v Titanium Alloy under Β Transus Temperature
1 Faculty of Aerospace Engineering, Shenyang Aerospace University, No. 37 Daoyi South Avenue, Daoyi Development District, Shenyang 110136, China 2 State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, No. 92 West Dazhi street, Nangang District, Harbin 100024, China 3 Beijing Aeronautical Manufacturing Technology Research Institute, No. 1 Dongjun Village, Chaoyang...
متن کاملEffect of Tool Speed on Axial Force, Mechanical Properties and Weld Morphology of Friction Stir Welded Joints of A7075-T651
The axial force measurement plays important role in tool designing and identification of its restrictions. Also, it is vital in design of machine mechanism and optimization of welding process parameters. In this study, a friction stir welded butt join on AA7075-T651 aluminum alloy plate is investigated. With change of some parameters, factors including axial force, mechanical properties, microh...
متن کاملTensile properties and fracture locations of friction-stir-welded joints of 2017-T351 aluminum alloy
Friction stir welding (FSW) is a new and promising welding process that can produce low-cost and high-quality joints of heat-treatable aluminum alloys because it does not need consumable filler materials and can eliminate some welding defects such as crack and porosity. In order to demonstrate the friction stir weldability of the 2017-T351 aluminum alloy and determine optimum welding parameters...
متن کاملEvaluation of microstructure and mechanical properties of friction stir welded copper / 316L stainless steel dissimilar metals
In the present research, friction stir welding (FSW) process was used for butt joining of pure copper plate to 316L stainless steel plate. Mechanical properties and microstructural characteristics of the joint were evaluated by microhardness and tensile tests as well as optical and scanning electron microscope (SEM). It was found that microstructure of the weld nugget (WN) has fine grains where...
متن کاملThe effect of pin profiles on the microstructure and mechanical properties of underwater friction stir welded AA2519-T87 aluminium alloy
Background: AA2519-T87 is a new armour grade aluminium alloy employed in the fabrication of light combat military vehicles. Joining of this material using fusion welding processes, results in the formation of solidification defects like porosity, alloy segregation and hot cracking. In order to overcome the solidification related problems, solid state welding processes such as friction stir weld...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Research and Technology
سال: 2020
ISSN: 2238-7854
DOI: 10.1016/j.jmrt.2020.05.067