Macroscopic three-dimensional physical simulation of water flooding in multi-well fracture-cavity unit

Three-dimensional Numerical Simulation of Metal Flow and Solidification in the Multi-cavity Casting Moulds of Automotive Components

The liquid metal flow and the solidification behaviours in a multi-cavity casting mould of two automotive cast parts were simulated in three dimensions. The commercial code, FLOW-3D® was used because it can track the front of the molten metal by a Volume of Fluid (VOF) method and allows complicated parts to be modeled by the Fractional Area/Volume Obstacle Representation (FAVOR) meth...

Investigations of Three- Dimensional Turbulent Cavity Flow Using Large Eddy Simulation Approach

three-dimensional numerical simulation of metal flow and solidification in the multi-cavity casting moulds of automotive components

the liquid metal flow and the solidification behaviours in a multi-cavity casting mould of two automotive cast parts were simulated in three dimensions. the commercial code, flow-3d® was used because it can track the front of the molten metal by a volume of fluid (vof) method and allows complicated parts to be modeled by the fractional area/volume obstacle representation (favor) method. the gre...

Three-Dimensional Simulation of Qeshm Channel Currents

Qeshm Channel is a shallow and narrow waterway located between Qeshm Island and the mainland in the vicinity of Hormuzgan Province, Islamic Republic of Iran. This channel is important because of its economic, industrial, fisheries and navigation role it plays as well as environmental issues it presents in the region. A prognostic study was performed to simulate currents in this channel, using C...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...