Machinability of Powder Metallurgy Steels Using PcBN Inserts
نویسندگان
چکیده
منابع مشابه
Determination of Transformation Induced Heat Transfer Coefficients in Mechanical Properties of Powder Metallurgy Steels
Powder metallurgy has been used for the manufacture of fully dense, which have not reacted composites consisting of a matrix of copper containing 50 -60 vol% particles with negative thermal ZrW2O8 expansion. On cycling between 25 and 300°C, the compounds showed coefficients thermal expansion which varies rapidly with temperature and significantly larger than expected by theory. Improvements in ...
متن کاملEffect of Density on the Microstructure and Mechanical Behavior of Powder Metallurgy Fe-mo-ni Steels
The microstructure and mechanical properties of Fe-0.85Mo-Ni powder metallurgy (P/M) steels were investigated as a function of sintered density. A quantitative analysis of microstructure was correlated with tensile and fatigue behavior to understand the influence of pore size, shape, and distribution on mechanical behavior. Tensile strength, Young’s modulus, strain-to-failure, and fatigue stren...
متن کاملa study of mechanical properties and fracture mechanisms of powder metallurgy parts prepared using semi pre-alloyed steels
in the present study, the mechanical properties and fracture mechanisms of two powder metallurgy low alloy steels, i.e. distaloy dh and distaloy hp, were investigated. all samples were sintered at 1120 ºc for 30 min in n2/h2 atmosphere. for evaluation of the effect of cooling rate on final properties, samples were cooled from sintering temperature with two different cooling rates. in addition, ...
متن کاملPorous, Superelastic NiTi Produced by Powder-Metallurgy
Near-stoichiometric NiTi was foamed in the solid state at elevated temperatures through creep expansion of highpressure argon pores previously entrapped during powder consolidation. A sample with 17% porosity was found to be superelastic up to a compressive stress of 800 MPa.
متن کاملLubricant Pyrolysis During Sintering of Powder Metallurgy Compacts
The chemistry surrounding the pyrolysis of N,NЈ-ethylenebisstearimide (EBS) compacted with iron powder is described for the first time. Heat treatment is carried out in a 5 vol pct hydrogen atmosphere (balance nitrogen) over the 100 °C to 850 °C range. The exhaust from the furnace is monitored by Fourier transform infrared and dispersive ultraviolet absorption spectroscopy; condensable material...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2014
ISSN: 2212-8271
DOI: 10.1016/j.procir.2014.03.094