Machinability of metallic materials

Machinability of Sinter-hardening PM materials with experimental machining enhancers

Although powder metallurgy is an economical method for production of near net shape components, machining operations are often required to deliver desired geometrical features, dimensional tolerances, and surface finish of PM parts. Machining enhancers are used to improve the machinability of PM components and to increase tool life. MnS is the most common machinability enhancer used for PM stee...

Machinability of glass fiber reinforced plastic (GFRP) composite materials

This paper deals with the study of machinability of GFRP composite tubes of different fiber orientation angle vary from 30 to 90. Machining studies were carried out on an all geared lathe using three different cutting tools: namely Carbide (K-20), Cubic Boron Nitride (CBN) and Poly-Crystalline Diamond (PCD). Experiments were conducted based on the established Taguchi’s Design of Experiments (DO...

The Effect of Different Non-Metallic Inclusions on the Machinability of Steels

Considerable research has been conducted over recent decades on the role of non‑metallic inclusions and their link to the machinability of different steels. The present work reviews the mechanisms of steel fractures during different mechanical machining operations and the behavior of various non-metallic inclusions in a cutting zone. More specifically, the effects of composition, size, number a...

Sustainable Non-Metallic Building Materials

Buildings are the largest energy consumers and greenhouse gases emitters, both in the developed and developing countries. In continental Europe, the energy use in buildings alone is responsible for up to 50% of carbon dioxide emission. Urgent changes are, therefore, required relating to energy saving, emissions control, production and application of materials, use of renewable resources, and to...

Fundamental Aspects of Corrosion of Metallic Materials