Machinability and Tribological Performance of Advanced Alloys

performance of biological system and advanced oxidation processes (aop) treating antibiotic production industrial wastewater

در این مطالعه، عملکرد دو سیستم اکسیداسیون شیمیایی پیشرفته و یک سیستم بیولوژیکی برای حذف آموکسی سیلین در فاضلاب های سنتزیدر غلظت های مشابه با موارد صنعتی مورد بررسی قرار گرفته شدند. مطالعه انجام شده دارای سه بخش متفاوت اکسیداسیون با ازن و اشعه uv، اکسیداسیون با استفاده از نانو فتوکاتالیست tio2 و استفاده از بیوراکتور هوازی لجن فعال با جداکننده های فیزیکی می باشد. در هر بخش، متغیر های متفاوتی متنا...

Machinability of Experimental Ti-Cu Alloys

This study is an investigation of the machinability of experimental Ti-Cu alloys (2, 5, and 10mass% Cu) as new dental titanium alloy candidates for CAD/CAM use. The alloys were slotted with a vertical milling machine and carbide square end mills under two cutting conditions. Their machinability was evaluated through cutting force using a three-component force transducer fixed on the table of th...

Machinability of experimental Ti-Ag alloys.

This study investigated the machinability of experimental Ti-Ag alloys (5, 10, 20, and 30 mass% Ag) as a new dental titanium alloy candidate for CAD/CAM use. The alloys were slotted with a vertical milling machine and carbide square end mills under two cutting conditions. Machinability was evaluated through cutting force using a three-component force transducer fixed on the table of the milling...

Machinability of Titanium Alloys in Drilling

TRIBOLOGICAL PROPERTIES OF Ti-Si-Zr ALLOYS

Nowadays titanium alloys are extensively used for aerospace and biomedical applications. However, despite good mechanical properties and excellent corrosion resistance they possess poor wear resistance and a tendency to galling and seizure. In this study the tribological properties of experimental Ti-Si-Zr based alloys were studied using a standard ball-on-disc wear testing system. The wear and...