Lubricity of carbon nitride coatings in humid nitrogen gas environment
نویسندگان
چکیده
منابع مشابه
Self-Lubricity of WSex Nanocomposite Coatings.
Transition metal chalcogenides with lamellar structure are known for their use in tribological applications although limited to vacuum due to their easy degradation in the presence of oxygen and/or moisture. Here we present a tailored WSex coating with low friction (0.07) and low wear rates (3×10(-7) mm3 Nm(-1)) even in ambient air. To understand the low friction behavior and lower chemical rea...
متن کاملMechanical and tribological behavior of silicon nitride and silicon carbon nitride coatings for total joint replacements.
Total joint replacements currently have relatively high success rates at 10-15 years; however, increasing ageing and an active population places higher demands on the longevity of the implants. A wear resistant configuration with wear particles that resorb in vivo can potentially increase the lifetime of an implant. In this study, silicon nitride (SixNy) and silicon carbon nitride (SixCyNz) coa...
متن کاملStructure and composition of silicon nitride and silicon carbon nitride coatings for joint replacements
SiNx and SiCxNy coatings were fabricated with high power impulse magnetron sputtering (HiPIMS). The coatings microstructure, growth pattern, surface morphology, composition, and bonding structure were investigated by AFM, SEM, GIXRD, TEM, EDS as well as XPS, and related to the deposition parameters target powers and substrate temperature. Crosssections of SiCxNy coatings showed either dense and...
متن کاملNitrogen driven structural transformation in carbon nitride materials
The variation of local bonding as a function of nitrogen concentration in plasma-assisted pulsed-laser deposited carbon Ž . nitride films has been systematically studied. Time-of-flight TOF mass spectroscopy and electron energy loss spectroscopy Ž . 3 Ž . EELS were combined to identify ablation conditions that produce highly sp -hybridized diamond-like-carbon DLC for typical carbon nitride grow...
متن کاملCryogenic Nitrogen Gas Cooling for Thermal Spray Coatings
Current Process HVOF thermal spray is widely used for coating critical wear parts like landing gear, bearing races, valves and turbine components. Generally, fully or partially molten metal, composite, or ceramic droplets are propelled from a gun or torch onto the workpiece. Multiple passes are required to build up the coating, since each pass only deposits ~ 0.0002 in 0.0005 in thickness of ma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the JSME (in Japanese)
سال: 2014
ISSN: 2187-9761
DOI: 10.1299/transjsme.2014dsm0388