LTCC-Based DC-DC Converter for Reduction of Switching Noise and Radiated Emissions
نویسندگان
چکیده
In this study, a low-temperature co-fired ceramic (LTCC)-based direct current (DC)-DC converter is proposed for reducing stray inductance and mitigating electromagnetic interference. The dominant radiating loop of the LTCC-based DC-DC features multilayer design, which helps suppress noise sources reduce radiated emissions. peak voltage switching at frequency 500 kHz approximately 8.98% lower than that conventional converter. addition, emission level sum, LTCC-technology-based design reduces
منابع مشابه
Multi-Stage DC-AC Converter Based on new DC-DC converter for energy conversion
This paper proposes a multi-stage power generation system suitable for renewable energy sources, which is composed of a DC-DC power converter and a three-phase inverter. The DC-DC power converter is a boost converter to convert the output voltage of the DC source into two voltage sources. The DC-DC converter has two switches operates like a continuous conduction mode. The input current of DC-DC...
متن کاملLinear-Assisted DC-DC Switching Converter with Constant Switching Frequency
This article shows the proposal of a linear–assisted converter or linear–&–switching hybrid converter with a constant switching frequency. The control loop of the system is based on the current–mode technique. The main disadvantage of a converter with current–mode control is the inherent instability of the loop when switch duty ratios are greater than 0.5. In order to make stable the proposed l...
متن کاملSoft-switching Ps-pwm Dc-dc Converter for Arc Welding
Soft-switching DC-DC converter using Phase-Shifted Pulse Width Modulation (PS-PWM) on secondary side of highfrequency transformer is described in the paper. The converter consists of a full-bridge inverter fitted with fast IGBT transistors. The output power of the converter is controlled by rectifier made up of two snap-off diodes in series with MOSFET transistors which is connected on secondar...
متن کاملA High Efficiency Low-Voltage Soft Switching DC–DC Converter for Portable Applications
This paper presents a novel control method to improve the efficiency of low-voltage DC-DC converters at light loads. Pulse Width Modulation (PWM) converters have poor efficiencies at light loads, while pulse frequency modulation (PFM) control is more efficient for the same cases. Switching losses constitute a major portion of the total power loss at light loads. To decrease the switching losses...
متن کاملReduction of Switching Losses for a DC-DC Converter using RCD Clamp Circuit
A snubber for a buck-boost converter is presented. The proposed snubber uses a resistor, inductor and capacitor. This circuit is capable of resetting the transformer, as well as eliminating leakage inductance voltage spike across the power switch. The proposed snubber eliminates the losses due to switching by freewheeling action through the diode.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of electromagnetic engineering and science
سال: 2023
ISSN: ['2671-7255', '2671-7263']
DOI: https://doi.org/10.26866/jees.2023.3.r.165