Low Vibration Stopping Method for the Compressor Driving Motor

Fault Detection Method on a Compressor Rotor Using the Phase Variation of the Vibration Signal

The aim of this work is the application of the phase variation in vibration signal for fault detection on rotating machines. The vibration signal from the machine is modulated in amplitude and phase around a carrier frequency. The modulating signal in phase is determined after the Hilbert transform and is used, with the Fast Fourier Transform, to extract the harmonics spectrum in phase. This me...

Vibration Related Testing for Hermetic Compressor Development

Linear Motor For Linear Compressor

In contrast to the conventional rotational compressors, the linear compressor is driven by a linear motor directly coupled with a piston. So the performance of the linear compressor is strongly dependent on the characteristics of the linear motor. In addition to high efficiency, the parameters of a linear motor should be nearly constant regardless of the amount of the current flow and position ...

The Study of Rolling Piston, Rotary Compressor Dynamic Behavior When Stopping to Reduce Noise and Vibration Level

Shigeru MURAMATSU, Chief Engineer Masafumi FUKUSHIMA, Chief Engineer Hiroshi MATSUNAGA, Engineer, Compressor Division, (PANASONIC), Noji-cho, This study presents experimental results on the rotary crankshaft behavior, the cylinder pressure and mechanical vibrations o£ a rolling-piston rotary compressor after shut down of the motor. It is shown as a conclusion that the most importantfactor chara...

Vibration Analysis of Refrigerant Compressor Shaft

An analysis of transverse vibrations of a compressor, using the modified Mykle stad-Prohl method which is one of the transfer matrix methods, is explained. A 10 hp four-cylinder refrigerant compressor was used as an object. The shaft and the frame are modeled as beams which are coupled with the sets of a spring and a damper that are the models of bearing oil film, bearing pedestals or the magne...