Low velocity impact performance of fiber-reinforced polymer impregnated with shear thickening fluid
نویسندگان
چکیده
منابع مشابه
Finite Element Analysis of Low Velocity Impact on Carbon Fibers/Carbon Nanotubes Reinforced Polymer Composites
An effort is made to gain insight on the effect of carbon nanotubes (CNTs) on the impact response of carbon fiber reinforced composites (CFRs) under low velocity impact. Certain amount of CNTs could lead improvements in mechanical properties of composites. In the present investigation, ABAQUS/Explicit finite element code (FEM) is employed to investigate various damages modes of nano composites ...
متن کاملShear-Thickening Fluid
Shear-Thickening Fluids (STFs) are a special Non-Newtonian Fluid that act like a solid when they experience a force. A simple example of this is a mixture of cornstarch and water. In this experiment, I text this mixture’s STF properties by using a ball drop to simulate an impact. By varying the ball drop height (and thus the force upon impact), and observing the bounce height, I determined wher...
متن کاملShear Strength of Fiber-Reinforced Clayey Sands
Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining ...
متن کاملthe impact resistance of fiber-reinforced polymer composites: a review
fiber reinforced composites are widely used instead of traditional materials in various technological applications. therefore, by considering the extensive applications of these materials, a proper knowledge of their impact behavior (from low- to high-velocity) as well as their static behavior is necessary. in order to study the effects of strain rates on the behavior of these materials, specia...
متن کاملMechanical Characteristics of Low-cost Hybrid Fiber Reinforced Polymer
This report deals with the experimental investigation of using large deformable FRP, ± 45° oriented fibers, in concrete-filled fiber tubes (CFFT) under axial cyclic compressive loading. In addition, this report presents finite element modeling (FE) of CFFTs with large rupture strain FRP (LRS-FRP). The LRS-FRP is made with polyethylene naphthalate (PEN) and polyethylene terephthalate (PET) fiber...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Testing
سال: 2021
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2021.107095