Low-temperature superplasticity of Si-added medium-Mn steel
نویسندگان
چکیده
Abstract. Grain boundary sliding, a deformation mechanism of superplasticity, occurs only at high temperatures, making it difficult for superplastic steels to be practically applied due energy consumption and surface oxidation. Therefore, in the present study, we introduce newly developed Si-added medium-Mn steel, which can superplastically deformed such low temperature 763 K. The low-temperature superplasticity this steel was caused by grain sliding between recrystallized α grains dynamically reverted γ grains. also exhibited room-temperature tensile strength (1336 MPa) after forming simulation.
منابع مشابه
Low temperature superplasticity and thermal stability of a nanostructured low-carbon microalloyed steel
We describe here for the first time the low temperature superplasticity of nanostructured low carbon steel (microalloyed with V, N, Mn, Al, Si, and Ni). Low carbon nanograined/ultrafine-grained (NG/UFG) bulk steel was processed using a combination of cold-rolling and annealing of martensite. The complex microstructure of NG/UFG ferrite and 50-80 nm cementite exhibited high thermal stability at ...
متن کاملSuperplasticity of Annealed H13 Steel
H13 steel is a widely used hot work die material. A new type of hot working method is imperative to develop complex and precise dies. In this paper, the heat treatment of H13 steel (AISI) was carried out by annealing, the final structure is a point or spherical pearlite, and the grain size is about 30-40 μm. The tensile properties of the annealed microstructure were investigated at 650, 750, an...
متن کاملEffects of Bainitic Transformation Temperature on Microstructure and Tensile Properties of 0.6C-Si-Mn Steel
1 緒 言 工具や軸受,ゲ ージなどの精密部品では残留オーステ ナイ ト(rR)が存在すると硬 さや疲労寿命の低下,切 削性 不良あるいは経年形状変化を招きそれらの性質に有害な 影響をもたらす.そ れゆえ,こ れ らに使用する鋼では rRを 極力減少させ るのが好 ましい.し か しなが ら,rR が低合金構造用鋼に存在する場合には延性やじん性が向 上するとともに低温におけるぜい性破壊の防止に役立つ 場合が多い.そ れゆえ,最 近進んで熱処理によって人 為的にrRの 量や存在形態を調整 し混合組織 として優れ た機械的性質 を得ようとす る研究が しばしば見受 けら れ1)~6)る.こ のようなrRを 積極的に利用 しようとする方法 として,近 年Si-Mn鋼 をベイナイ ト変態させるオース テンパー処理が注 目されている. Si-Mn鋼 をベイナイ ト変態 させた場合多量のrRが ...
متن کاملNumerical Simulation of High Temperature Corrosion Processes in Mn, Cr, Si, Al – Alloyed Steel Samples
The grain boundary oxidation mechanism in hot rolled steel samples during cooling from 500 °C – 800 °C down to room temperature was mathematically modeled. Given a fixed temperature ramp, the migration of the atomic species (iron, oxygen and the alloying elements) has been calculated with the parabolic rate equation for diffusion. After each small time step, the data was transferred into the da...
متن کاملA LOW TEMPERATURE SPECIFIC HEAT INVESTIGATION OF Cd Mn Se AND Cd Mn S
The specific heat of Cd Mn Se (x = 0.01) and Cd , Mn S (x = 0.026) in the temperature range of 0.3 - 40K was measured. The measurements were carried out in different applied magnetic fields (H = 0,10,20, 28KG). The results were analyzed with a model which includes long range interactions. Calculations based on on extended version of nearest neighbor pair approximation (including triplets)...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials research proceedings
سال: 2023
ISSN: ['2474-3941', '2474-395X']
DOI: https://doi.org/10.21741/9781644902615-18