Low temperature spark plasma sintering of YIG powders

Low temperature spark plasma sintering of YIG powders Authors: L. Fernandez-Garcia

A transition from a low to a high spin state in the magnetization saturation between 1000 and 1100 oC calcination temperature is observed in YIG powders prepared by oxides mixture. Spark plasma sintering of these powders between 900 and 950 oC leads to dense samples with minimal formation of YFeO3, opening the way to cosintering of YIG with metals or metallic alloys. The optical properties depe...

Full densification of Molybdenum powders using Spark Plasma Sintering

Pure molybdenum powder was sintered using Spark Plasma Sintering under various temperatures, and holding times, under a pressure of 77 MPa and a heating rate at 700°C/min. After sintering, a carbide layer was observed at the surface. The carbide layer thickness, the relative density of the sample as well as the microhardness and the grain size of Mo were measured. The carbide thickness depends ...

Spark-plasma-sintering (SPS) of nanostructured titanium carbonitride powders

Spark-Plasma-Sintering (SPS) compaction experiments of nanostructured titanium carbonitride powders have been performed at 1600°C and 1800°C (sintering time = 1 min). The as-received nanostructured samples have been synthesized by rapid condensation from the gas-phase (high frequency plasma). The sintering results were compared with data obtained by various conventional sintering techniques suc...

Spark Plasma Sintering of Negative Temperature Coefficient Thermistor Ceramics

Mechanical Study of Copper Bonded at Low Temperature Using Spark Plasma Sintering Process

Bonding of high purity polished copper was investigated using the Spark Plasma Sintering technique (SPS) showing the effect of SPS parameters (surface roughness, time, temperature and pressure) on the bonding strength behaviour. Mechanical characterization of the bonded samples was performed at room temperature using tensile test. Two surfaces roughnesses were studied (un-polished and polished ...