Low temperature ion-nitriding of Fe-Mo-C sintered steels
نویسندگان
چکیده
منابع مشابه
Viscoelastic behaviour of porous sintered steels compact
This paper describes the viscoelastic behaviour of sintered steels with porosities of 12, 20 and 33%, using a dynamic mechanical analyser. Test specimens were prepared from premix powders of 100–150 mm size by a process of die compaction, delubrication and sintering. The influences of test temperature and vibrational frequency on storage and loss modulus and tangent delta have been investigated...
متن کاملLow-Temperature Carburization of Austenitic Stainless Steels
LOW-TEMPERATURE CARBURIZATION is a gaseous carburization process performed at atmospheric pressure, at temperatures where the kinetics of substitutional diffusion are very slow. Low-temperature carburization hardens the surface of austenitic stainless steels through the diffusion of interstitial carbon, without the formation of carbides. The surface must be activated, by modification and remova...
متن کاملNanosized precipitates in H13 tool steel low temperature plasma nitriding
A comprehensive study of pulsed nitriding in AISI H13 tool steel at low temperature (400°C) is reported for several durations. X-ray diffraction results reveal that a nitrogen enriched compound (-Fe2-3N, iron nitride) builds up on the surface within the first process hour despite the low process temperature. Beneath the surface, X-ray Wavelength Dispersive Spectroscopy (WDS) in a Scanning Elec...
متن کاملEffect of Density on the Microstructure and Mechanical Behavior of Powder Metallurgy Fe-mo-ni Steels
The microstructure and mechanical properties of Fe-0.85Mo-Ni powder metallurgy (P/M) steels were investigated as a function of sintered density. A quantitative analysis of microstructure was correlated with tensile and fatigue behavior to understand the influence of pore size, shape, and distribution on mechanical behavior. Tensile strength, Young’s modulus, strain-to-failure, and fatigue stren...
متن کاملThe Efficiency of Ion Nitriding of Austenitic
M. Ogórek, Z. Skuza, T. Frączek, Czestochowa University of Technology, Czestochowa, Poland The study examined layers were formed on the outer surface of austenitic stainless steel 304 under glow discharge conditions in the low-temperature and short-term ion nitriding. The outer layers analyzed in the work produced in parallel in the classical process of cathode and a novel method of “active scr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Le Journal de Physique IV
سال: 1993
ISSN: 1155-4339
DOI: 10.1051/jp4:19937146