Low-temperature H2S removal for solid oxide fuel cell application with metal oxide adsorbents
نویسندگان
چکیده
منابع مشابه
Chemical precipitation and characterization of multicomponent Perovskite Oxide nanoparticles – possible cathode materials for low temperature solid Oxide fuel cell
A set of multicomponent perovskite oxide nanoparticles based on La1-xSrxCo1-yFeyO3-δ(LSCF) were prepared by a simple chemical precipitation method for application in low temperature solid oxide fuel cells (LT-SOFC) as cathode materials. The precursor materials used in this synthesis were lanthanum nitrate hexahydrate [La(NO3)<su...
متن کاملChemical precipitation and characterization of multicomponent Perovskite Oxide nanoparticles – possible cathode materials for low temperature solid Oxide fuel cell
A set of multicomponent perovskite oxide nanoparticles based on La1-xSrxCo1-yFeyO3-δ(LSCF) were prepared by a simple chemical precipitation method for application in low temperature solid oxide fuel cells (LT-SOFC) as cathode materials. The precursor materials used in this synthesis were lanthanum nitrate hexahydrate [La(NO3)<su...
متن کاملCatalytic coatings on steel for low-temperature propane prereforming to solid oxide fuel cell (SOFC) application.
Catalyst layers (4-20 microm) of rhodium (1 wt%) supported on alumina, titania, and ceria-zirconia (Ce(0.5)Zr(0.5)O(2)) were coated on stainless-steel corrugated sheets by dip-coating in very stable colloidal dispersions of nanoparticles in water. Catalytic performances were studied for low-temperature (< or = 500 degrees C) steam reforming of propane at a steam to carbon ratio equal to 3 and l...
متن کاملchemical precipitation and characterization of multicomponent perovskite oxide nanoparticles – possible cathode materials for low temperature solid oxide fuel cell
a set of multicomponent perovskite oxide nanoparticles based on la1-xsrxco1-yfeyo3-δ(lscf) were prepared by a simple chemical precipitation method for application in low temperature solid oxide fuel cells (lt-sofc) as cathode materials. the precursor materials used in this synthesis were lanthanum nitrate hexahydrate [la(no3)3.6h2o], strontium nitrate [sr(no3)2], cobalt nitrate hexahydrate [co...
متن کاملCo3O4 spinel protection coating for solid oxide fuel cell interconnect application
In the present study, electrophoretic deposition (EPD) method in different electric fields (30 – 300 V / cm) was used to apply Co3O4 spinel coating to SUS 430 as SOFC interconnect. The coated and uncoated specimens were pre-sintered in air at 800 and 900 °C for 3 h followed by cyclic oxidation at 700 and 800 °C for 500 h, respectively. X-ray diffraction analysis (XRD), Scanning Electron Microsc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Adsorption Science & Technology
سال: 2016
ISSN: 0263-6174,2048-4038
DOI: 10.1177/0263617416672664