Low Temperature Deformation of Internally Oxidized Fe-Al Alloys
نویسندگان
چکیده
منابع مشابه
CALCULATION OF THERMODYNAMIC PROPERTIES OF Al-Fe, Al-Ni AND Ni-Fe ALLOYS USING FACTSAGE
Thermodynamic predicting analysis of three binary systems Al-Fe, Al-Ni and Ni-Fe are shown in this paper. Thermodynamic analysis involved calculation of activities, coefficient of activities, partial and integral values for enthalpies and Gibbs energies of mixing and excess energies at three different temperatures: 1873K, 1900K and 1973K, as well as calculated phase diagrams, for the investigat...
متن کاملHigh Temperature Deformation of Twin-Roll Cast Al-Mn-Based Alloys after Equal Channel Angular Pressing
Twin roll cast Al-Mn- and Al-Mn-Zr-based alloys were subjected to four passes of equal channel angular pressing. The resulting grain size of 400 nm contributes to a significant strengthening at room temperature. This microstructure is not fully stable at elevated temperatures and recrystallization and vast grain growth occur at temperatures between 350 and 450 °C. The onset of these microstruct...
متن کاملHigh-temperature dislocation-precipitate interactions in Al alloys: An in situ transmission electron microscopy deformation study
The fundamental processes controlling the high-temperature interaction of dislocations with precipitates in Al-alloys were investigated in real time by deforming specimens in situ in the transmission electron microscope at elevated temperature. The observations support a bypass mechanism involving the interaction of lattice dislocations with the precipitate–matrix interface dislocations, where ...
متن کاملDeformation-driven catalysis of nanocrystallization in amorphous Al alloys
Nanocrystals develop in amorphous alloys usually during annealing treatments with growth- or nucleation-controlled mechanisms. An alternative processing route is intense deformation and nanocrystals have been shown to develop in shear bands during the deformation process. Some controversy surrounded the idea of adiabatic heating in shear bands during their genesis, but specific experiments have...
متن کاملACOUSTIC EMISSION DURING DEFORMATION OF Al-Li ALLOYS
The relationship between tensile elongation and acoustic emission (AE) detected during compressive deformation of 81-Li and Al-Li-Zr alloys has been investigated for a range of microstructure. For comparison, AE measurements have been carried out for A1-Cu and commercial 7050 alloys. In the polycrystalline binary A1-Li alloys, the most pronounced AE was detected in the underaged condition durin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1978
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.42.4_357