Low Temperature Deformation of Commercial Ti Alloys
نویسندگان
چکیده
منابع مشابه
Hot deformation studies on discontinuously reinforced Ti-Alloys
Titanium alloys exhibit high specific strength and stiffness that fit structural applications demanding lightweight. The microstructure of the alpha-beta titanium alloys can be changed by thermomechanical processes such as heat treatments and pre-forging to achieve a certain ductility. Ceramic reinforcements can improve specific strength and stiffness, and also the wear resistance. In Situ part...
متن کاملBeta Ti Alloys with Low Young’s Modulus
Composition dependence of Young’s modulus in Ti-V and Ti-Nb binary alloys and Sn-added ternary alloys quenched from phase region was investigated at room temperature in relation to the stability of phase. A minimum of Young’s modulus in the binary alloys appears at such a composition that athermal ! phase transformation is almost completely suppressed. Formation of isothermal ! phase by aging a...
متن کاملDIFFICULTIES IN GRAIN REFINING ALUMINUM LITHIUM ALLOYS USING COMMERCIAL Al-Ti AND Al-Ti-Bor MASTER ALLOYS
High strength aluminum alloys, especially those containing zirconium, are historically difficult to grain refine. Early efforts by Alcoa indicated that the addition of lithium to these alloys increases difficulty with grain refinement. Although grain refining of alloys 2090 and 2091 was possible, consistent results were not obtained. Statistically-designed experiments were used to quickly ident...
متن کاملSlip Resistance of Ti-Based High-Temperature Shape Memory Alloys
Titanium with Nb, Zr, and Ta alloying substitutions possesses high plastic slip resistance and high transformation strains upon bcc (b) to orthorhombic ða00Þ transformation. In the current study, we determine the critical resolved shear stress (CRSS) for slip in Ti alloyed for a wide composition range of Nb, Ta, and Zr. The CRSS is obtained with a proposed Peierls–Nabarro formalism incorporatin...
متن کاملDynamic Shear Deformation and Failure of Ti-6Al-4V and Ti-5Al-5Mo-5V-1Cr-1Fe Alloys
To study the dynamic shear deformation and failure properties of Ti-6Al-4V (Ti-64) alloy and Ti-5Al-5Mo-5V-1Cr-1Fe (Ti-55511) alloy, a series of forced shear tests on flat hat shaped (FHS) specimens for the two investigated materials was performed using a split Hopkinson pressure bar setup. The evolution of shear deformation was monitored by an ultra-high-speed camera (Kirana-05M). Localized sh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1973
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.37.3_307