Low Temparature Bonding Process Using Metal Nanoparticles
نویسندگان
چکیده
منابع مشابه
Nanoplasmonic Sensing using Metal Nanoparticles
Cover: An illustration of surface immobilized spherical gold nanoparticles illuminated with a ray of light. " Everything happens for a reason and that reason is usually physics " V Abstract In our modern society, we are surrounded by numerous sensors, constantly feeding us information about our physical environment. From small, wearable sensors that monitor our physiological status to large sat...
متن کاملWire-bonding process development for low-k materials
A 60-lm bond-pad-pitch wire-bonding process was developed using test dies with a SiO2 dielectric layer under aluminium pads, and was then fine-tuned for a low-k device using three types of gold wires with different mechanical properties. Bulk material hardness of the wires were characterised using a wire-bonding machine, the force applied and diameters of squashed free-air balls. It was found t...
متن کاملLow-stress transfer bonding using floatation
A novel method for transferring thin, large-area polymer layers from a mould and its subsequent bonding to a destination substrate is presented here. Buoyancy is used for transfer via floatation to allow the release of internal stress in the polymer and to avoid induced strain. Additionally, floatation leads to wrinkle-free contact between the polymer layer and its destination substrate, an imp...
متن کاملeffect of metal nanoparticles on biological denitrification process: a review
globally, increasing nitrate concentrations have become a significant environmental problem and a potential risk to public health. the world health organization (who) has set a limit of (10 (mg.l -1 )) no 3 - for human consumption and (100 mg.l -1 )) no 3 - for animals. water above these limits requires denitrification. nitrates causes cancer, blue-bay syndrome, hypertension and thyroid hypertr...
متن کاملA new low-temperature high-aspect-ratio MEMS process using plasma activated wafer bonding
This paper presents the development and characterization of a new high-aspect-ratio MEMS process. The silicon-on-silicon (SOS) process utilizes dielectric barrier discharge surface activated low-temperature wafer bonding and deep reactive ion etching to achieve a high aspect ratio (feature width reduction-to-depth ratio of 1:31), while allowing for the fabrication of devices with a very high an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Smart Processing
سال: 2012
ISSN: 2186-702X
DOI: 10.7791/jspmee.1.126