"Low Power, Low Area and High Performance Hybrid Type Dynamic CAM Design"
نویسندگان
چکیده
منابع مشابه
Design of Low Power & High Performance
Clock distribution networks consume a major portion of the power of a chip . Continuous Scaling of VLSI Technology i.e Channel length ,Supply has lead to integration of millions of transistors on a single chip operating at very high clock frequencies. Besides area and performance, the modern VLSI designs aim at low-power consumption due to limited battery lifetime. Most voltage scaling techniqu...
متن کاملDesign of Power Gated ML Sensing Low Power CAM
A Content Addressable Memory (CAM) is a memory unit that performs single clock cycle content matching instead of addresses. CAMs are vast used in look-up table functions, network routers and cache controllers. Since basic lookups are performed over all the stored memory information there is high power dissipation. In reality there is always trade-offs between power consumption, area used and th...
متن کاملLow Power and High Performance Dynamic CMOS XOR/XNOR Gate
A hybrid network is proposed in dynamic CMOS XOR/XNOR gate to avoid signal skew and reduce the power consumption. Compared to the standard N type dynamic gate leakage power, dynamic power and layout area of the novel XOR/XNOR gate are reduced. In this paper we studied different technologies, their merits and demerits. Comparison of different technologies is completely on the basis of leakage po...
متن کاملDesign of Low Power High Speed Hybrid Full Adder
In this paper, a proposed 1-bit hybrid full adder design employing both transmission gate logic and complementary metal– oxide–semiconductor (CMOS) logic is reported. The design is implemented for 1-bit Ripple Carry Adder and then is extended for 64-bit Ripple Carry Adder. The circuit is implemented using Mentor Graphics tools 130nm technology. The performance parameters such as delay, area, to...
متن کاملLow-Area Low-Power and High-Speed TCAMS
Ternary Content Addressable Memory (TCAM) is hardwarebased parallel lookup tables with bit-level masking capability. They are attractive for applications such as packet forwarding and classification in network routers. TCAMS are gaining importance in high-speed intensive applications. However, the high cost and power consumption are limiting their popularity and versatility. This paper presents...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Computer Applications
سال: 2011
ISSN: 0975-8887
DOI: 10.5120/2585-3571