Low-power current-mode 0.9-V voltage regulator
نویسندگان
چکیده
منابع مشابه
Low Power Low Voltage Current Mode Pipelined A/D Converters
This paper presents two prototypes of low power low voltage current mode 9 bit pipelined a/d converters. The first and the second converters are configured of 1.5 bit and 2.5 bit stages, respectively. The a/d converter structures are composed of current mode building blocks and final comparator block which converts the analog current signal into digital voltage signal. All building blocks have ...
متن کاملLow-Voltage Current Mode Power Factor Function Generator
This paper proposes a realization of power factor function generator having an arbitrary base and power factor which are determined by the ratios of the currents provided from outside of the circuit. The circuit characteristics do not depend on any transistor parameters, temperature, and other environmental conditions. The circuit operation is based on current mode that has a capability of low ...
متن کاملDesign of A Low - Voltage and Low - Power Voltage Mode
A low-voltage and low-power voltage mode adder/subtractor using MOSFETs in weakinversion is presented in this paper. Since the MOSFETs in the proposed circuit are biased in weak inversion, consequently its power dissipation is very low. The proposed circuit has been simulated with the HSPICE using a N-well 0.35μm 2p4m process and the results show that, under the supply voltage of 1V, the power ...
متن کاملA Low-Voltage, Low Quiescent Current, Low Drop-Out Regulator
The demand for low-voltage, low drop-out (LDO) regulators is increasing because of the growing demand for portable electronics, i.e., cellular phones, pagers, laptops, etc. LDO’s are used coherently with dc-dc converters as well as standalone parts. In power supply systems, they are typically cascaded onto switching regulators to suppress noise and provide a low noise output. The need for low v...
متن کاملLow-Voltage and Low-Power CMOS Voltage-to-Current Converter
A CMOS voltage-to-current converter in weak inversion is presented in this Letter. It can operate for low supply voltage and its power consumption is also low. As the input voltage varies from −0.15 V to 0.15 V, the measured maximum linearity error for the proposed voltageto-current converter, is about 3.35%. Its power consumption is only 26 μW under the supply voltage of 2 V. The proposed volt...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Journal of Solid-State Circuits
سال: 1994
ISSN: 0018-9200
DOI: 10.1109/4.309911