Low Potential and Non-Enzymatic Hydrogen Peroxide Sensor Based on Copper Oxide Nanoparticle on Activated Pencil Graphite Electrode
نویسندگان
چکیده
منابع مشابه
Amperometric Non-Enzymatic Hydrogen Peroxide Sensor Based on Aligned Zinc Oxide Nanorods
Zinc oxide (ZnO) nanorods (NRs) have been synthesized via the hydrothermal process. The NRs were grown over a conductive glass substrate. A non-enzymatic electrochemical sensor for hydrogen peroxide (H₂O₂), based on the prepared ZnO NRs, was examined through the use of current-voltage measurements. The measured currents, as a function of H₂O₂ concentrations ranging from 10 μM to 700 μM, reveale...
متن کاملNon-enzymatic Amperometric Glucose Biosensor Based on Copper Hexacyanoferrate-film Modified-gnp-graphite Composite Electrode
A non-enzymatic amperometric glucose biosensor based on a modified electrode was fabricated by electrochemical derivatization of copper hexacyanoferrate (CuHCF) film at gold nanoparticles (GNP) adsorbed graphite wax composite electrode. The modified electrode was characterized by cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The electrode was also characterized by scannin...
متن کاملA Novel Nonenzymatic Hydrogen Peroxide Sensor Based on a Polypyrrole Nanowire-Copper Nanocomposite Modified Gold Electrode
A novel nonenzymatic hydrogen peroxide (H2O2) sensor has been fabricated by dispersing copper nanoparticles onto polypyrrole (PPy) nanowires by cyclic voltammetry (CV) to form PPy-copper nanocomposites on gold electrodes. Scanning electron microscopy (SEM) was used to characterize the morphologies of the PPy nanowires and the PPy-copper nanocomposite. The reactivity of the PPy-copper nanocompos...
متن کاملVoltammetric determination of amitriptyline based on graphite screen printed electrode modified with a Copper Oxide nanoparticles
A novel electrochemical sensor was proposed for the determination of amitriptyline based on the copper oxide (CuO) nanoparticles modified graphite screen-printed electrode. CuO nanoparticles were used to enhance the surface area of the electrode and then improve the sensitivity of the electrochemical sensor. Amitriptyline electrochemical response characteristics of the modified electrode in a p...
متن کاملVoltammetric determination of amitriptyline based on graphite screen printed electrode modified with a Copper Oxide nanoparticles
A novel electrochemical sensor was proposed for the determination of amitriptyline based on the copper oxide (CuO) nanoparticles modified graphite screen-printed electrode. CuO nanoparticles were used to enhance the surface area of the electrode and then improve the sensitivity of the electrochemical sensor. Amitriptyline electrochemical response characteristics of the modified electrode in a p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Brazilian Chemical Society
سال: 2016
ISSN: 0103-5053
DOI: 10.21577/0103-5053.20160232