Low-Isostatic-Press Sintering of Iron Alloy Powder
نویسندگان
چکیده
منابع مشابه
Porous NiTi alloy prepared from elemental powder sintering
An elemental powder sintering (EPS) technique has been developed for the synthesis of porous NiTi alloy, in which Ni and Ti powders are used as the reactants and TiH2 powder is added as a pore-forming agent and active agent. Effects of various experimental parameters (sintering temperature, sintering time, and TiH2 content) on the porosity, pore size and pore distribution as well as phase compo...
متن کاملExperimental Investigation of Effective Parameters at Laser Sintering the Mixture of Iron and Copper Powder
Optimization of process parameter is one of the ideal goals in laser sintering. The results of this process were measured as output parameters like: density, micro hardening, macro hardening, tension, roughness, stiffness, balling. In this paper, the influence of input parameter such as laser power, scan speed, material powder and etc are surveyed on output parameter like balling affection and ...
متن کاملExperimental Investigation of Effective Parameters at Laser Sintering the Mixture of Iron and Copper Powder
Optimization of process parameter is one of the ideal goals in laser sintering. The results of this process were measured as output parameters like: density, micro hardening, macro hardening, tension, roughness, stiffness, balling. In this paper, the influence of input parameter such as laser power, scan speed, material powder and etc are surveyed on output parameter like balling affection and ...
متن کاملPhysical properties of a nickel-base alloy prepared by isostatic pressing and sintering of the powdered metal.
The physical and mechanical properties of samples of a nickel-base alloy fabricated by powder metallurgy were determined. The particle sizes of the powders used to make the samples varied from -80/ +200 mesh to -325 mesh. The compaction pressure varied from 138 to 414 MN/m2 and the sintering temperature varied from 1150 to 1250 degrees C. The shrinkage during processing, the porosity, tensile s...
متن کاملStudy of Graphite Content and Sintering Temperature on Microstructure Properties of Iron-Based Powder Preform
In this present work effect of temperature and graphite contents on the microstructural and mechanical properties of iron based powder metallurgy freeform was studied. The different graphite contents (0%, 2%, 5% and 10%) were mixed in iron powder and compact them in 100 KN. These specimens were sintered at 7000 C, 8500 C and 10000 C in muffle furnaces. Microstructural properties were evaluated ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals
سال: 2007
ISSN: 1880-6880,0021-4876
DOI: 10.2320/jinstmet.71.786