Low-impulse blast behaviour of fibre-metal laminates
نویسندگان
چکیده
منابع مشابه
Thermo-Mechanical Behaviour of Flax-Fibre Reinforced Epoxy Laminates for Industrial Applications
The present work describes the experimental mechanical characterisation of a natural flax fibre reinforced epoxy polymer composite. A commercial plain woven quasi-unidirectional flax fabric with spun-twisted yarns is employed in particular, as well as unidirectional composite panels manufactured with three techniques: hand-lay-up, vacuum bagging and resin infusion. The stiffness and strength be...
متن کاملFatigue Resistance of Composite Fibre-metal Laminates Subjected to Impact Loading
GLARE (GLAss REinforced) belongs to a family of fibre-metal laminates currently being used as a skin material for the upper and side shells in the forward and rear fuselage body of A380. This composite material consists of thin layers of aluminium sheets and unidirectional prepreg layers of glass fibres embedded into an epoxy based matrix. GLARE demonstrates excellent resistance to fatigue crac...
متن کاملModeling of the Fatigue Life of Fiber Metal Laminates under Low Velocity Impact by Finite Element Method
In this study, first by using the finite element method, fatigue life of fiber metal laminates of Glare type subjected to impact was obtained and the numerical results of the model were compared with the experimental results. With regard to the very good matching between numerical and experimental results, then the results of the finite element model were generalized and expanded, and with usin...
متن کاملFlexural and Impact Properties of Stainless Steel based Glass Fibre Reinforced Fibre Metal Laminate under Hygrothermal Conditioning
Fibre metal laminates (FMLs) have appeared as the most suitable materials for shipbuilding, aeronautical and aerospace applications due to their superior mechanical properties over traditional materials. In this paper, degradation in flexural and impact properties of glass fibre/epoxy composite (GF/E composite) and stainless steel glass fibre/epoxy fibre metal laminate (SS FML) due to hygrother...
متن کاملDrilling of carbon fibre reinforced laminates – a study
The distinguishing characteristics of carbon fibre reinforced laminates, like low weight, high strength or stiffness, had resulted in an increase of their use during the last decades. Although parts are normally produced to “near-net” shape, machining operations like drilling are still needed. In result of composites non-homogeneity, this operation can lead to delamination, considered the most ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composite Structures
سال: 2012
ISSN: 0263-8223
DOI: 10.1016/j.compstruct.2011.10.027