Low friction MoS2 TiW coatings manufactured on X38CrMoV5-1 steel using PVD method
نویسندگان
چکیده
منابع مشابه
Characterization of CrN/TiN PVD Coatings on 316L Stainless Steel
In order to further enhance tribological properties 316 Low carbon stainless steel (L SS) used on mechanical parts. CrN/TiN with DC magnetron sputtering sources was carried out on PVD 316 L SS. The micro structure of the CrN/TiN coatings were investigated by Scanning electron microscope (SEM), X-ray Diffraction (XRD) and tribology properties were investigated on a Pin on Disc friction and wear ...
متن کاملTribological behavior of sputter-deposited MoSX/Ni coatings
AbstractSputtered MoS2 coatings have been mostly used as a solid lubricant. In this investigation, MoSx/Ni composite coatings with Ni contents varying from 0 to 22 % were deposited onto steel substrate using a DC magnetron sputter process. The MoS2/Ni ratio in the coatings was controlled by sputtering the composite targets. The composition, microstructure, and mechanical properties of the...
متن کاملPVD coatings on aluminium substrates
It is well known that aluminium is today the most widely used metallic material besides steel. The mechanical characteristics of aluminium offer an increasing application field, especially where lightweight constructions are required. The demands for improved characteristics such as higher strength and greater durability are achieved by the development of new aluminium alloys. Continuous effort...
متن کاملOptimization of the parameters of low-carbon steel (EN10130) welding using friction stir welding method
Friction-stir welding process is a novel method of solid state welding, which produces heat due to friction between the pin, the shoulder and the workpiece. This heat causes a paste area. Shoulder pressure and pin spin cause edges integration and lead to welding. In this study, firstly, the feasibility of welding of steel sheet (EN10130) with a thickness of 1.5mm has been tested by 58 experim...
متن کاملAntimicrobial titanium/silver PVD coatings on titanium
BACKGROUND Biofilm formation and deep infection of endoprostheses is a recurrent complication in implant surgery. Post-operative infections may be overcome by adjusting antimicrobial properties of the implant surface prior to implantation. In this work we described the development of an antimicrobial titanium/silver hard coating via the physical vapor deposition (PVD) process. METHODS Coating...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materialwissenschaft und Werkstofftechnik
سال: 2013
ISSN: 0933-5137
DOI: 10.1002/mawe.201300142