منابع مشابه
Maskless photolithography using UV LEDs.
A UV light emitting diode (LED) with a maximum output of 372 nm was collimated using a pinhole and a small plastic tube and focused using a microscope objective onto a substrate for direct lithographic patterning of the photoresist. Movement of the substrate with a motorised linear stage (syringe pump) allowed lines in SU-8 to be pattered with a width down to 35 microm at a linear velocity of 8...
متن کاملNear UV LEDs made with in situ doped p-n homojunction ZnO nanowire arrays.
Catalyst-free p-n homojunction ZnO nanowire (NW) arrays in which the phosphorus (P) and zinc (Zn) served as p- and n-type dopants, respectively, have been synthesized for the first time by a controlled in situ doping process for fabricating efficient ultraviolet light-emitting devices. The doping transition region defined as the width for P atoms gradually occupying Zn sites along the growth di...
متن کاملTunable blue-green-emitting wurtzite ZnS:Mg nanosheet-assembled hierarchical spheres for near-UV white LEDs
Mg-doped ZnS hierarchical spheres have been synthesized via hydrothermal method using mixed solvents of ethylenediamine and DI water without any surface-active agent. The surface morphology and microstructure studies revealed that the hierarchical spheres were consisted of many well-aligned nanosheets with width 10 nm and length about 50 ~ 100 nm. X-Ray diffraction results show that the ZnS:Mg ...
متن کاملLow frequency noise and annoyance.
Low frequency noise, the frequency range from about 10 Hz to 200 Hz, has been recognised as a special environmental noise problem, particularly to sensitive people in their homes. Conventional methods of assessing annoyance, typically based on A-weighted equivalent level, are inadequate for low frequency noise and lead to incorrect decisions by regulatory authorities. There have been a large nu...
متن کاملDesign of an S-band Ultra-low-noise Amplifier with Frequency Band Switching Capability
In this paper, an ultra-low-noise amplifier with frequency band switching capability is designed, simulated and fabricated. The two frequency ranges of this amplifier consist of the 2.4 to 2.5 GHz and 3.1 GHz to 3.15 GHz frequency bands. The designed amplifier has a noise figure of less than 1dB, a minimum gain of 23 dB and a VSWR of less than 2 in the whole frequency band. The design process s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Lithuanian Journal of Physics
سال: 2019
ISSN: 2424-3647,1648-8504
DOI: 10.3952/physics.v59i3.4081