Low energy–high flux nitrogen implantation of an oxide-dispersion-strengthened FeAl intermetallic alloy
نویسندگان
چکیده
منابع مشابه
TEM ANALYSIS OF THE GROWTH OF OXIDE SCALES AT DIFFERENT TEMPERATURES IN FeAl GRADE 3 INTERMETALLIC ALLOY
Upon the isothermal oxidation of an ODS FeAl Grade 3 intermetallic alloy, a structured oxide scale is developed between 800 and 950o C. TEM studies have revealed a three-layered structure with a top nanoequiaxed alumina, a central alumina and a bottom Fe-Al spinel. At these temperatures, aluminium outward diffusion does not seem to be suppressed neither by the spinel sub-layer nor by the yttria...
متن کاملFabrication of Fe-Cr-Al Oxide Dispersion Strengthened PM2000 alloy using Selective Laser Melting**
The expansion in application of the selective laser melting (SLM) process for fabrication of new alloy materials continues. However, to date, there has been no investigation of the effect of this process on the final microstructure of ‘melt sensitive’ powder alloys such as mechanically alloyed oxide dispersion strengthened (ODS) FeCrAl. In this study commercial PM2000 powder, a ferritic ODS all...
متن کاملGrain Boundary Mobility in Fe-Base Oxide Dispersion Strengthened PM2000 Alloy
An alloy can be created without melting, by violently deforming mixtures of different powders. As first discovered by Benjamin, inert oxides can also be introduced into the microstructure using this technique. The resulting dispersion-strengthened alloyed powders are then consolidated using hot-isostatic pressing and extrusion, to produce a solid with a very fine grain structure on a sub-microm...
متن کاملAlNb intermetallic alloy
This investigation was conducted to ascertain the benefits of electropolishing after mechanical polishing for electron backscattered diffraction of a Ti 2 AlNb intermetallic Ti − 21Al − 29Nb (at.%) alloy containing the orthorhombic (O) and body-centered-cubic (BCC) phases. Electropolishing was performed at − 40 ° C in 6% H 2 SO 4 methanol solution. Atomic force microscopy was used to measure th...
متن کاملElectrochemical and Tribological Behaviour of Oxide Dispersion Strengthened Duplex Stainless Steel in Mine Water Environment
Abstract This work investigated the electrochemical and aqueous tribological behavior of hot pressed 2205 duplex stainless steel (DSS). DSS sintered composites of different volume percent (% vol) of partially stabilized zirconia (PSZ) was developed using powder metallurgy (PM) technique. Electrochemical behaviour was studied at room temperature, using open circuit potential and potentiody...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Thin Solid Films
سال: 2004
ISSN: 0040-6090
DOI: 10.1016/j.tsf.2004.04.054