Low-Energy Ion Beam Technology for a Material Application
نویسندگان
چکیده
منابع مشابه
A Low Energy Ion Beam Pepper Pot Emittance Device
The transverse emittance of the ion beam at the Heidelberg Ion Therapy Center (HIT) will be measured within the Low Energy Beam Transport (LEBT) using a pepper-pot measurement system. At HIT, two ECR sources produce ions (H, He, C and O) at an energy of 8keV/u with different beam currents from about 80 μA to 2mA. The functionality and components of the pepper-pot device is reviewed as well as t...
متن کاملUsing a quartz crystal microbalance for low energy ion beam etching studies
A quartz crystal microbalance ~QCM! has been used for etching yield measurements in a low energy ion beam system. The goal is to obtain etching yields for ion energies below 150 eV for various ion chemistries and target materials. Typical beam currents are about 0.5 mA, and the mass change per unit time on the QCM is much smaller than that for typical QCM applications. A number of problems with...
متن کاملBeam dynamics simulations of post low energy beam transport section in RAON heavy ion accelerator.
RAON (Rare isotope Accelerator Of Newness) heavy ion accelerator of the rare isotope science project in Daejeon, Korea, has been designed to accelerate multiple-charge-state beams to be used for various science programs. In the RAON accelerator, the rare isotope beams which are generated by an isotope separation on-line system with a wide range of nuclei and charges will be transported through ...
متن کاملSimplified Beam Line with Space Charge Compensation of Low Energy Ion Beam
Simplified beam line for low energy Ion implantation is considered. Compensation of the space charge of high perveance, low energy ion beam in beam lines for ion implantation and isotope separation has been investigated. Different mechanisms of the compensating particle formation such as ionization by the beam, secondary emission of electrons and negative ions, electronegative gas admixture, an...
متن کاملLOW-ENERGY-ION ENHANCED DIFFUSION AT THE SURFACE OF METALS
Radiation enhanced diffusion at the surface of metals has been observed and studied for low-energy nitrogen ions at the surface of copper. The displacement of the target atoms during irradiation creates vacancies and other defects near the surface, thus enhancing the diffusion of implanted materials toward the surface and also into the solid. The mechanism has been studied here by a specia...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Plasma and Fusion Research
سال: 2003
ISSN: 0918-7928
DOI: 10.1585/jspf.79.645